Kelpro Oil Seal Crankshaft Rear

Kelpro · Part number 97171 · NZ$31.00 incl. GST

G'day mate! For your trusty Mitsubishi Triton, Pajero, or Delica, KELPRO Engine Parts are the real deal, ensuring your motor hums along.

Price

NZ$31.00 including GST. Part number 97171.

Fits these vehicles

• Chrysler
• Chrysler Galant (1972–1975)
• Chrysler Galant (1972–1975)
• Chrysler Galant (1974–1976)
• Chrysler Galant (1974–1978)
• Chrysler Galant (1974–1978)
• Chrysler Galant (1976–1978)
• Chrysler Lancer (1974–1976)
• Chrysler Lancer (1977–1979)
• Chrysler Lancer (1977–1979)
• Chrysler Lancer (1977–1980)
• Chrysler Lancer (1977–1980)
• Chrysler Lancer (1979–1981)
• Chrysler Sigma (1977–1980)
• Daihatsu
• Daihatsu
• Daihatsu
• Daihatsu Delta (1984–1997)
• Daihatsu Delta (1985–2002)
• Daihatsu Delta Wide (1987–1999)
• Daihatsu Rocky (1985–1998)
• Daihatsu Rocky (1986–1989)
• Daihatsu Rocky (1987–1993)
• Daihatsu Rocky (1989–1989)
• Daihatsu Rocky (1991–1998)
• Daihatsu Rocky (1993–1998)
• Daihatsu Rocky (1993–1998)
• Daihatsu Scat (1982–1985)
• Great Wall Hover (2007–2011)
• Great Wall Steed (2012+)
• Great Wall V-Series (2009–2015)
• Great Wall V-Series (2009+)
• Great Wall V-Series (2010+)
• Great Wall V-Series (2010+)
• Great Wall X-Series (2010–2020)
• Hyundai H100 (1996–1997)
• Hyundai H100 (1999–2004)
• Hyundai H100 (1999–2004)
• Hyundai Lantra (1990–1995)
• Hyundai Lantra (1990–1995)

Description

Engine Parts Replacement Guide — Keep Your Mitsubishi Humming with KELPRO
> Engine parts are the very heart of your vehicle, the bits and bobs that turn fuel into grunt. When you're putting your Mitsubishi Triton, Pajero, or Delica through its paces — whether it's a hard day on the farm or a family road trip — these parts can take a beating. Over time, that wear and tear can lead to a sluggish ride, higher fuel bills, and nobody wants a kaput engine, eh?
What's Your Motor Telling You?
• Odd noises from under the bonnet (knocking, ticking, grinding — not a good sign!)
• Feeling a bit flat? Less grunt when you put your foot down?
• Drinking oil like it's going out of fashion, or seeing smoke signals from the exhaust?
• Engine sputtering or idling rough, like it's got a case of the jitters?
• That pesky 'Check Engine' light glowing on the dash?
Will it pass WOF?
If your engine components are looking a bit sad or giving up the ghost, you could be looking at dodgy emissions, a motor that's just not pulling its weight, or even a full-blown engine failure. Any of those will get you a big fat 'fail' on your WOF. Keeping those engine bits in tip-top shape isn't just about performance; it's essential for WOF compliance here in NZ.
DIY or Workshop?
Swapping out engine parts can be anywhere from a bit of a fiddle (like spark plugs or belts) to a full-on mission (think pistons or crankshafts). We're talking a difficulty rating of 7/10 for many engine part replacements, often needing special tools and a good dose of mechanical know-how. You could be looking at a few hours, or even a couple of days, depending on the job. You'll likely need gear like torque wrenches, an engine hoist, fancy diagnostic kit, and a good old comprehensive socket set.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, team, before you dive into any engine work, Bob's got a few pro tips and essential consumables to keep you safe and sorted:
• Safety First! Always wear safety glasses to protect your peepers from any unexpected splashes or flying bits. And for goodness sake, never get under a car supported only by a jack! Use proper jack stands, every time.
• Keep it Clean: Engine work can get messy! Have some Workshop Rags handy for spills and to wipe down parts. A good engine flush additive can also help clean out the gunk before an oil change.
• Right Tools for the Job: An oil filter wrench is a no-brainer for oil changes, and an oil drip tray will save your driveway from looking like an oil slick. Don't forget some heavy-duty nitrile gloves to keep your hands clean and protected.
• Post-Job Cleanup: After all that hard work, a good heavy-duty hand cleaner will get your mitts sparkling again, ready for that well-deserved cafe lunch.

Following these simple steps will help ensure your engine work goes smoothly and safely!
Expert Recommendation
Bob at CARFIX always reckons you should sort out any worn or failing engine parts sharpish to stop bigger headaches down the track and keep your vehicle going strong. The KELPRO range is a top choice, offering reliable, quality engine components manufactured to OE specifications — perfect for your Mitsubishi. Bob @ CARFIX is always keen for a yarn to help you figure out exactly what part your Mitsubishi needs. Pop into Bob's Shop for a chat — he's always got a solution!
Fitment Notes
This KELPRO engine part is a good fit for a bunch of Mitsubishi models, including the Triton (from 2010-2015), Pajero (1989-1990), and the trusty Delica (1986-2004). Just make sure you double-check it against your specific vehicle's year, make, model, and engine code to ensure it's the perfect match.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this oil seal, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.