NGK Iridium Spark Plug

NGK Spark Plugs · Part number TR6IX · NZ$63.00 incl. GST

Keep your V8 humming like a beauty! Spark plugs are critical for reliable ignition and top performance, especially in tough conditions.

Price

NZ$63.00 including GST. Part number TR6IX.

Fits these vehicles

• Ford F-250 (2003–2007)
• Holden Adventra (2003–2004)
• Holden Adventra (2004–2007)
• Holden Berlina (2002–2004)
• Holden Berlina (2002–2004)
• Holden Berlina (2004–2005)
• Holden Berlina (2005–2006)
• Holden Berlina (2006–2013)
• Holden Berlina (2008–2013)
• Holden Calais (2006–2013)
• Holden Calais (2008–2013)
• Holden Calais (2009–2013)
• Holden Calais (2009–2013)
• Holden Caprice (2003–2004)
• Holden Commodore (2002–2004)
• Holden Commodore (2002–2004)
• Holden Commodore (2004–2006)
• Holden Commodore (2004–2007)
• Holden Commodore (2005–2007)
• Holden Commodore (2006–2013)
• Holden Commodore (2006–2013)
• Holden Commodore (2007–2010)
• Holden Commodore (2007–2013)
• Holden Commodore (2010–2013)
• Holden Crewman (2003–2004)
• Holden Crewman (2003–2004)
• Holden Crewman (2004–2006)
• Holden Crewman (2004–2006)
• Holden Crewman (2005–2006)
• Holden Crewman (2005–2006)
• Holden Crewman (2006–2007)
• Holden Monaro (2001–2003)
• Holden Monaro (2003–2003)
• Holden Monaro (2003–2004)
• Holden Monaro (2004–2006)
• Holden One Tonner (2003–2004)
• Holden One Tonner (2004–2005)
• Holden One Tonner (2004–2005)
• Holden Statesman (2003–2004)
• Holden Statesman (2006–2010)

Description

Spark Plug TLC: Keeping Your V8 Roaring with NGK
> Spark plugs, eh? They're the unsung heroes igniting that precious air/fuel mix in your engine. Over time, heat and carbon buildup take their toll, leading to misfires and sapping your engine's oomph, especially in high-performance V8s found in beasts like Holden Commodores and Ford F-250s.

Spotting the Warning Signs
• Engine's misfiring, especially when you put your foot down
• Idling rough as guts
• Fuel economy's gone down the gurgler
• Struggling to fire up in the mornings
• That pesky check engine light's glaring at ya

Will it pass WOF?
She'll be right, provided your engine's running sweet and not blowing smoke like a chimney. Dodgy spark plugs cause incomplete combustion, hiking up emissions and risking a WOF fail.

DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Spark plug socket, ratchet, extension, torque wrench, spark plug gap tool.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, a few things to keep in mind, yeah?
• Safety First, Mates! Engines get hot as, so make sure it's stone cold before you start fiddling. And disconnect the battery – no one wants a zap.
• Cleanliness is King: A clean engine bay is a happy engine bay. Give the area around the spark plugs a good wipe down to stop any muck falling into the cylinders when you pull the plugs.
• Spark Plug Socket: Get the right size so you don't damage the plug.
• Dielectric Grease: Smear a little on the inside of the boot connector to keep moisture out and ensure a good connection.

Expert Recommendation
Swapping out your spark plugs is a no-brainer for keeping your engine purring and your fuel bills down, especially in high-performance machines like Holden Commodores and HSV Clubsports. Bob @ CARFIX is always here to help you choose the right part for your V8. Head over to Bob's Shop for a yarn!

Fitment Notes
Double-check you've got the right spark plug gap for your engine. Some models might need different plugs depending on engine mods or if you're running on LPG.

Bob here, reminding you to get the right parts and get the job done right!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.