CARFIX

Smart-O Sump Plug M14 X 1.5 Blister Pack

Smarto — Smart-O Sump Plug M14 X 1.5 Blister Pack — part number R3BP1

Smarto · Part number R3BP1 · NZ$41.00 incl. GST

If you're noticing a pesky oil leak under your vehicle, chances are it's time to check that essential bit of kit, the sump/drain plug – a crucial part for vehicles from your zippy VW Golf to a sturdy RAM 1500, ensuring your engine oil stays put.

Price

NZ$41.00 including GST. Part number R3BP1.

Fits these vehicles

Description

Sump/Drain Plug Replacement Guide — Bob's Sorted Solution!
> The sump/drain plug is essentially the gatekeeper at the bottom of your engine's oil pan, letting you drain the old oil out during a service. But, like anything that gets a bit of a workout, its sealing washer can get a bit tired, or the plug itself might cop some damage. This is super common in vehicles like the VW Golf and Audi A4 after countless oil changes, or if you've got a RAM 1500 that's seen some tough conditions, leading to those annoying oil drips.
What's the Fuss About? (Symptoms That Led You Here)
• Visible oil drips or puddles under your car – a bit of a giveaway, eh?
• Engine oil levels dropping faster than your pay packet, with no other obvious leaks.
• Oil residue hanging around the drain plug area – not a good look.
• Finding it a real mission to tighten the drain plug during an oil change.
Will it pass WOF?
Yep, an oil leak from your sump/drain plug is a definite WOF failure here in New Zealand. It's a double whammy – bad for the environment and even worse for your engine's health!
DIY or Workshop?
Difficulty: 2/10 (Totally DIY-able with basic tools, mate!)
Estimated Time: 15-30 minutes (Best tackled during an oil change, saves you time!)
Tools Required: Socket/spanner for the drain plug, a good oil drain pan, a fresh crush washer (often comes with your new plug), and a torque wrench (highly recommended for a perfect snug fit).
Expert Recommendation
Bob @ CARFIX always reckons you should swap out that sump/drain plug, or at least its crush washer, every time you do an oil change. It's a no-brainer for a leak-free seal! The SMARTO sump/drain plug is a top-notch choice, crafted to OE specifications, meaning it’ll fit like a glove and seal up tight for your vehicle. We've also got a heap of other quality options to suit every budget. Don't muck around with oil leaks; a small investment in a new plug can save you a whole lot of grief and costly engine damage down the track. Bob @ CARFIX is always keen for a yarn and can help you figure out exactly what you need for your ride. Pop into Bob's Shop for a chat anytime!

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive under the bonnet, make sure you've got your ducks in a row for a safe and clean job:
• Safety Glasses: Absolutely essential to protect your peepers from any unexpected splashes or drips. Don't skip this one!
• Heavy-Duty Nitrile Gloves: Keep those hands clean and protected from old engine oil. Trust us, your hands will thank you later! Nitrile Gloves
• Engine Flush Additive: Consider giving your engine a little internal clean before draining the old oil. It helps loosen up any sludge. Engine Flush Additive
• Oil Drip Tray: A must-have to catch all that old engine oil. Keeps your garage floor spick and span, avoiding a nasty mess. Oil Drip Tray
• Workshop Rags: Have plenty of clean rags on hand for spills and wiping down components. Workshop Rags
• Oil Filter Wrench: If you're doing a full oil service, you'll need this to get that old filter off. Oil Filter Wrench

Fitment Notes
This sump/drain plug is suitable for a bunch of models, including the VOLKSWAGEN GOLF (1997-2004), AUDI A4 (2005-2009), SKODA KAMIQ (2019-2024), and RAM 1500 (2020-2024). Always double-check the specific thread size and type for your exact model year – wouldn't want to get it wrong!

Bob's your uncle, you'll have it sorted in no time!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this sump/drain plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.