Audi 100 KU Wagon 101kW (1984-1988) FWD Petrol 2.2L (1984–1988)

The Audi 100 (C3), a remarkable vehicle from 1984 to 1988, made a significant impact in New Zealand with its stellar build quality and pioneering aerodynamic design. Renowned for its ability to reduce road noise, the Audi 100 ensures a comfortable driving experience. It’s a pleasure to see these well-engineered cars still cruising on our roads, showcasing their lasting value and appeal.

Parts for the Audi 100 KU Wagon 101kW (1984-1988) FWD Petrol 2.2L

• Engine Oil (22)
• Axle Gear Oil (17)
• Gear Oil Gearbox (16)
• Automatic Transmission Fluid (14)
• Radiator Coolant (11)
• Wiper Blade Front (11)
• Radiator Cap (10)
• Driver Side Blade (8)
• Passenger Side Blade (8)
• Oil Filter (8)
• Automatic Transmission Filter (7)
• Tie Rod End (7)
• Brake Pads Front (7)
• Brake Fluid (6)
• Oil Pressure Switch/Sender (5)
• Steering Rack Boot Kit (5)
• Disc Brake Rotor Rear (4)
• Spark Plug (4)
• Drive Belt Alternator (4)
• Brake Hose Front (4)
• Air Filter (4)
• Wiper Refill Set Front (4)
• Strut Bonnet (3)
• Cv Joint (3)
• Wheel Cylinder Rear (3)
• Oil Cap (3)
• Oxygen Sensor Pre-Catalytic Converter (3)
• Wheel Bearing Kit/Hub Front (3)
• Clutch Kit (3)
• Oxygen Sensor (3)
• Wheel Bearing Kit/Hub Rear (3)
• Wiper Refill (3)
• Brake Caliper Guide Sleeve Kit (2)
• Shocks / Strut Rear (2)
• Suspension Bush Front Control Arm - Lower (2)
• Shocks / Strut Front (2)
• Suspension Bush Control/Trailing Arm (2)
• Disc Brake Rotor Front (2)
• Brake Pads Rear (2)
• Brake Caliper Kit Front (2)
• Brake Hose Rear (2)
• Brake Caliper Kit Rear (2)
• Master Cylinder Kit Brake (2)
• Timing Belt Camshaft (2)
• Bearing Clutch Spigot (2)
• Air Conditioning Receiver Drier (2)
• Thermo Fan Switch (2)
• Air Conditioning Tx Valve (2)
• Ignition Lead Set (2)
• Ignition Module (2)
• Ignition Switch (2)
• Sump/Drain Plug (2)
• Oil Seal Kit Timing (1)
• Brake Pad Wear Sensor Front (1)
• Bearing Clutch Release (1)
• Clutch Slave Cylinder (1)
• Brake Pad Fitting Kit Rear (1)
• Master Cylinder Clutch (1)
• Strut Boot Kit Front (1)
• Cv Joint Front Outer (1)

Known issues

Rust is a key concern, inspect the sills, wheel arches and around the windows very carefully. The automatic transmissions can develop issues with age. Check for coolant and oil leaks. Suspension components wear with age, look at the bushings, ball joints and shock absorbers.

WOF tips

WOF inspections will focus on rust, structural integrity, brake condition, and suspension components. Headlight alignment and function are crucial for WOF compliance.

About the Audi 100 KU Wagon 101kW (1984-1988) FWD Petrol 2.2L

The Audi 100 (C3) featured an array of efficient engines, prioritizing both economy and capability for everyday driving. Comfort and smooth ride quality were hallmark traits, making it a popular choice among drivers. However, as with any aging vehicle, regular maintenance becomes imperative for an enjoyable ownership experience. Key components like the front and rear brake systems are crucial – consider our Front Brake Service to ensure top-notch performance, and don’t overlook the complete Rear Brake Service for a thorough overhaul.

For those who love this classic, be aware that the cooling system is essential to monitor. Around 150,000 km, you should inspect important parts like the water pump, thermostat, and radiator hoses. This is a good opportunity to connect with our Cooling service category, where you can find quality replacement parts to maintain your Audi’s efficiency. Additionally, keep an eye on potential rust issues in the sills and around windows—both vital components that ensure your vehicle's longevity. Regular checks on the automatic transmission and common oil or coolant leaks can also mitigate future complications. Our Oil Service and Cooling categories provide the essential elements needed for smooth operations and preventive care.

Questions owners ask

What are the common rust spots I should check on my 1984-1988 Audi 100 (C3) in New Zealand?

For the Audi 100 (C3), rust is a significant concern. You should carefully inspect the sills, wheel arches, and around the windows. These areas are known to be prone to rust and can impact the vehicle's structural integrity.

What maintenance should I perform on the cooling system of my Audi 100 (C3) around 150,000 km?

Around 150,000 km, it's crucial to inspect important cooling system components such as the water pump, thermostat, and radiator hoses. This is a good opportunity to consider our Cooling service category at CARFIX for quality replacement parts to maintain your Audi’s efficiency and prevent overheating issues.

What are the key WOF inspection points for a 1984-1988 Audi 100 (C3) in New Zealand?

For a Warrant of Fitness (WOF) inspection on your Audi 100 (C3), inspectors will primarily focus on rust, overall structural integrity, the condition of the brake systems (front and rear), and suspension components. Headlight alignment and proper function are also crucial for WOF compliance.

Where can I get replacement brake parts for my 1984-1988 Audi 100 (C3) in NZ?

CARFIX stocks 339 SKUs for the Audi 100 (C3). You can find a complete range of parts for your Front Brake Service and Rear Brake Service, including brake pads and rotors, within our brake system categories to ensure top-notch performance and safety.

Are there any common issues with the automatic transmission in the Audi 100 (C3)?

Yes, the automatic transmissions in the Audi 100 (C3) can develop issues with age. It's advisable to have it checked regularly to mitigate potential complications and ensure smooth operation.

What are the recommended service intervals for an Audi 100 (C3) and what should I look out for regarding leaks?

The recommended service interval for the Audi 100 (C3) is 10,000 km. During these services, or more frequently, you should keep an eye out for potential oil or coolant leaks. Our Oil Service and Cooling categories at CARFIX provide essential elements for preventive care and addressing these issues promptly.