CARFIX

TRW Brake Pads Set

TRW — TRW Brake Pads Set — part number GDB1935

TRW · Part number GDB1935 · NZ$426.00 incl. GST

For your BMW 1 Series, brake pads are absolutely crucial for safety, providing the stopping power you need to navigate our Kiwi roads with confidence; TRW pads are a top-notch choice.

Price

NZ$426.00 including GST. Part number GDB1935.

Fits these vehicles

Description

Brake Pad Replacement Guide — Let's Get Your BMW 1 Series Sorted with TRW!
> Brake pads are your car's unsung heroes, turning all that go-fast energy into a safe stop by squeezing against the brake disc. They're like the soles of your shoes, wearing down over time, especially with all the stop-start city driving these compact beauties often see around Aotearoa.
Signs It's Time for a Fix-Up
• Hearing squeals or grinding noises when you hit the brakes? That's a classic sign.
• Feeling like your brakes aren't quite biting like they used to, or the pedal feels a bit 'spongy'?
• Getting a bit of a shimmy through the steering wheel or pedal when you slow down?
• Had a peek and noticed your pads are looking a bit thin?
• Is that pesky brake warning light on your dash giving you the evil eye?
Will it pass WOF?
Nah, mate. Worn-out brake pads are a big no-no for safety and will definitely see your BMW 1 Series fail its WOF here in New Zealand. You need decent pad thickness to get that tick of approval.
DIY or Workshop?
Difficulty: 6/10 (A bit of a challenge, but totally achievable for the keen DIYer)
Estimated Time: Allow about 1-2 hours per axle – perfect for a Saturday morning project.
Tools Required: Jack, sturdy jack stands (safety first!), wheel nut wrench, C-clamp or a proper brake caliper piston tool, a good socket set, torque wrench, brake cleaner, and maybe a wire brush for a proper clean-up.
Bob's "Get It Done Right" Companion Checklist
Before you dive under the bonnet (or, in this case, the wheel arch!), let's make sure you've got everything you need for a smooth, safe job:
• Safety Glasses: Don't let any rogue dust or debris get in your peepers! Grab a pair of safety glasses — your eyes will thank you.
• Heavy-Duty Nitrile Gloves: Keep those hands clean and protected from grime and brake dust. A good pair of nitrile gloves is a no-brainer.
• Brake Cleaner: Essential for blasting away all that carbon dust and getting things squeaky clean. A can of brake cleaner will make a world of difference.
• Anti-Seize Caliper Grease: A little dab of this on caliper pins and backing plates ensures smooth operation and prevents squeals. Don't skip it!
• Shop Rags/Paper Towels: For wiping up spills and keeping your workspace tidy.

Remember, never, ever get under a car that's only supported by a jack! Use proper jack stands. Your safety is paramount!

Expert Recommendation
Bob @ CARFIX always says, "Don't muck around with brakes!" If they're showing signs of wear, get 'em sorted to keep that stopping power sharp and everyone safe on the road. These TRW brake pads are a cracker choice for your BMW 1 Series — they're known for quality, quiet operation, and performing as good as, if not better than, the original gear. Seriously, don't cut corners on braking safety. Pop into Bob's Shop at CARFIX for a yarn — he'll help you figure out exactly what your BMW 1 Series needs to get you back on the road, safe as houses!
Fitment Notes
These pads are tailor-made for specific BMW 1 Series models from 2011 to 2019, covering the 116d, 114d, 118i, 120d, 116i, 125d, 114i, and 118d. Just make sure you double-check the exact fitment for your particular sub-model and year — sometimes there are little quirks even within the same series!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (Part No. DF4450S) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.