TRW · Part number DF1940S · NZ$115.00 incl. GST
Gotta keep those brakes sharp, eh? Disc brake rotors are what your brake pads grab onto to stop your Nissan Bluebird or Vanette.
NZ$115.00 including GST. Part number DF1940S.
Swapping Out Your Disc Brake Rotor — TRW Style
> Disc brake rotors are absolutely vital for your Nissan Bluebird or Vanette's stopping power. They can wear down over time, warp from the heat, or just get plain rusty. That means dodgy braking and could be a safety risk, especially if you're giving it heaps out there.
Spotting the Signs of Trouble
• Brakes sound like a flock of seagulls or a coffee grinder?
• Brake pedal doing the Macarena (vibrating like crazy)?
• Taking forever and a day to pull up?
• Rotors looking like they've been through a war (scoring, rust, or nasty dings)?
• Brake pads wearing unevenly?
Will it pass WOF?
Busted brake rotors are a surefire way to fail your WOF here in New Zealand. They need to be within the minimum thickness and not looking like a demolition derby winner to pass the test.
DIY or Workshop?
Difficulty: 6/10
Time Needed: An hour or two per rotor
Gear You'll Need: Jack and stands (never get under a car supported only by a jack!), lug wrench, socket set, torque wrench, brake cleaner, and fresh brake pads (good idea while you're at it).
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking on those rotors, let's make sure you're sorted. Safety first, always!
• Safety Glasses: Don't want any rusty bits flying in your eyes, trust me. Grab some Safety Glasses.
• Nitrile Gloves: Keep your mitts clean and protected from all the brake dust and grime. These Nitrile Gloves are the go.
• Brake Cleaner: Blast away all that nasty brake dust and gunk before you start pulling things apart. This Brake Cleaner will do the trick.
• Caliper Grease: A little dab of anti-seize caliper grease goes a long way to ensuring smooth brake operation and preventing sticking. Available at CARFIX.
Expert Recommendation
Worn rotors mean your Nissan Bluebird, Vanette, or Silvia isn't stopping as well as it should. Get them swapped out to keep things safe and prevent damage to other parts. Pop into Bob's Shop for a yarn, and I'll sort you out with the perfect part for your ride!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB197) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.