Champion Platinum Spark Plug

CHAMP · Part number 7963 · NZ$22.00 incl. GST

Got a V8 like an HSV Grange or Holden Commodore? Sticking in some new spark plugs is crucial for keeping them humming sweet and delivering that sweet, sweet power.

Price

NZ$22.00 including GST. Part number 7963.

Fits these vehicles

• Ford Cougar (1999–2003)
• Ford Escape (2001–2008)
• Ford Explorer (2001–2008)
• Ford Explorer (2001–2008)
• Holden Adventra (2003–2004)
• Holden Adventra (2004–2007)
• Holden Adventra (2004–2007)
• Holden Berlina (1999–2000)
• Holden Berlina (1999–2000)
• Holden Berlina (2000–2002)
• Holden Berlina (2000–2002)
• Holden Berlina (2002–2004)
• Holden Berlina (2002–2004)
• Holden Berlina (2002–2004)
• Holden Berlina (2004–2005)
• Holden Berlina (2004–2005)
• Holden Berlina (2004–2005)
• Holden Berlina (2005–2006)
• Holden Berlina (2006–2007)
• Holden Calais (1999–2000)
• Holden Calais (2000–2002)
• Holden Calais (2003–2004)
• Holden Calais (2004–2006)
• Holden Calais (2005–2006)
• Holden Caprice (1999–2000)
• Holden Caprice (2000–2003)
• Holden Caprice (2003–2004)
• Holden Caprice (2004–2006)
• Holden Caprice (2006–2006)
• Holden Commodore (2000–2002)
• Holden Commodore (2002–2004)
• Holden Commodore (2002–2004)
• Holden Commodore (2002–2004)
• Holden Commodore (2004–2006)
• Holden Commodore (2004–2007)
• Holden Commodore (2005–2007)
• Holden Commodore (2006–2007)
• Holden Crewman (2005–2006)
• Holden Crewman (2005–2006)
• Holden Crewman (2006–2007)

Description

Spark Plug Refresh: Get Your V8 Roaring Again with Champion!
​
> Spark plugs? They're the unsung heroes that kick off combustion in your engine's cylinders, delivering the spark that ignites the fuel/air mix. Over time, they get worn out, causing misfires and sapping your engine's mojo, especially in tough conditions like high-performance V8s or the daily grind.

Spotting the Signs: Is it Time for New Plugs?
• Engine's missing a beat? Misfires, especially when you put your foot down
• Idling like a tractor? Rough as guts!
• Fuel economy heading south?
• Hard to get the beast started?
• That pesky check engine light glaring at you?

WOF Woes? Will This Fix It?

Yep, if your engine's running rough and spitting out too many emissions because of dodgy spark plugs, you'll fail that WOF check faster than you can say 'cafe lunch'. Misfires are a no-go.

DIY or Hand it to the Pros?

Difficulty: 6/10

Time Estimate: 1-2 hours

Tools You'll Need: Spark plug socket, ratchet, extension bar, torque wrench, spark plug gap tool.

Expert Advice

Worn spark plugs can really put a dent in your HSV or Holden's performance and fuel bill. Swapping them out for some quality Champion plugs will smooth things out and get you back in the game. Bob @ CARFIX is your man for sussing out exactly what you need for your [Vehicle Type]. Pop into Bob's Shop for a yarn.

🛠️ Bob's "Get It Done Right" Companion Checklist

Before you dive in, grab some Brake Cleaner. Give those plug holes a good blast to get rid of any gunk before you pull the old plugs out. Safety first, eh? Chuck on some Safety Glasses to keep the crud out of your eyes, and a pair of Nitrile Gloves will save your hands from getting too grimy. A little dab of anti-seize on the new plug threads never hurts either – makes life easier next time around!

Fitment Notes

Make sure that spark plug gap is spot-on for your engine. Check your service manual for the right specs. Some V8s might need a bit of dismantling to reach all the plugs.

Bob @ CARFIX is your man for sussing out exactly what you need for your [Vehicle Type]. Head over to Bob's Shop for a yarn!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.