
Ryco Filters · Part number Z1123 · NZ$90.00 incl. GST
Keeping your Dodge RAM 2500 or 3500 truck's engine sweet as a nut means using a good oil filter to catch all the nasties.
NZ$90.00 including GST. Part number Z1123.
Dodge RAM Oil Filter Change: Keepin' Your Truck Roaring!
> Oil filters are the unsung heroes, stopping all the gritty bits from turning your engine into a rough metal symphony, especially crucial when your Dodge RAM 2500 or 3500 is working hard. Let's get it sorted.
Uh Oh... Signs You Need a New Oil Filter
• Oil pressure's lookin' low
• Engine's makin' some funny noises (knockin' or tickin')
• Oil's lookin' like mud (dirty or contaminated)
• Check engine light's on
• Truck's not runnin' like it used to
Will it pass WOF?
Sweet as, mate! As long as your oil filter isn't leaking everywhere, your Dodge RAM should cruise through its Warrant of Fitness.
Get Your Hands Dirty or Leave it to the Pros?
Difficulty: 4/10
Estimated Time: Half an hour, give or take.
Gear You'll Need: Oil filter wrench, socket set, drain pan to catch the old oil, and some gloves to keep your mitts clean.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, a quick yarn about doing the job properly. Safety first, always! Never get under a car supported only by a jack – use proper stands. Grab some Nitrile Gloves to protect your hands from the old oil – it's filthy stuff. And while you're at it, a can of Engine Flush run through before you drain the old oil can lift stubborn deposits. Don't forget an Oil Drip Tray to save the driveway from stains and some rags for wiping up spills.
Bob's Two Cents
Changing your oil filter regularly is a no-brainer for keeping your Dodge RAM purring like a kitten. Pop into Bob's Shop at CARFIX for a yarn – I'll help you find the perfect bits for your RAM.
Fitment Notes
Double-check you've got the right filter for your Dodge RAM's year and engine. Some models are a bit picky about size and thread type.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> HPRD15010)](/parts/HPRD15010) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.