CARFIX

Champion Copper Plus Spark Plug

CHAMP · Part number RS7YX6 · NZ$18.00 incl. GST

Needing a bit of spark for your old Holden Commodore or Toyota Lexcen? New spark plugs are just the ticket.

Price

NZ$18.00 including GST. Part number RS7YX6.

Fits these vehicles

Description

Spark Plug TLC for Your Aussie Classic — with Champion
> Got a rough-running Holden Commodore or Toyota Lexcen? Spark plugs are often the culprit! They spark the fuel/air mix in your engine, and over time, they get worn out from heat and carbon. This can lead to misfires and poor performance. Time for a change, mate!
Spotting the Signs of Dodgy Spark Plugs
• Engine's misfiring, especially when you put your foot down
• Idling like a tractor
• Fuel bills climbing higher than the Sky Tower
• Struggling to start on a cold morning
• That pesky engine light's back on
Will it pass WOF?
Failing spark plugs can cause emissions to exceed legal limits, leading to a WOF failure in New Zealand.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Spark plug socket, ratchet, extension, torque wrench, spark plug gap tool
Expert Recommendation
Swapping out your spark plugs is a no-brainer for keeping your Commodore or Lexcen running sweet. If you're not sure which ones you need, Bob at CARFIX is your man! Head down to Bob's Shop for a yarn.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, a little prep goes a long way. Safety first, always! And let's not make a mess, eh?
• Safety Glasses: Protect those peepers from any stray bits. Safety Glasses
• Nitrile Gloves: Keep your hands clean and protected from grease and grime. Nitrile Gloves
• Spark Plug Socket: Ensure correct fitment for a no-fuss install.
• Torque Wrench: Tighten your new plugs to the specified torque. Overtightening can lead to damage.
• Spark Plug Gap Tool: Ensure the spark plug gap is set correctly for your specific engine. Refer to your vehicle's service manual for the correct gap specification.

Fitment Notes
Ensure the spark plug gap is set correctly for your specific engine. Refer to your vehicle's service manual for the correct gap specification.

Swing by Bob's Shop at CARFIX for expert advice and the right parts to get your car sorted!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.