Champion Copper Plus Spark Plug

CHAMP · Part number RN9YC4 · NZ$8.00 incl. GST

Need a reliable spark for your trusty steed? Champion spark plugs deliver just that, igniting the fuel-air mix in motors from Honda Accords to Mitsubishi Delicas.

Price

NZ$8.00 including GST. Part number RN9YC4.

Fits these vehicles

• Acura Integra (1985–1990)
• Acura Integra (1985–1990)
• Chevrolet Aveo (2008+)
• Chevrolet Matiz (2005–2007)
• Chevrolet Matiz (2005–2013)
• Chevrolet Spark (2005–2010)
• Daewoo Espero (1993–1999)
• Daewoo Espero (1995–1997)
• Daewoo Matiz (1998+)
• Daewoo Matiz (2005–2010)
• Daewoo Tico (1996–2000)
• Daihatsu Charade (1983–1987)
• Daihatsu Charade (1983–1987)
• Daihatsu Charade (1987–1990)
• Daihatsu Charade (1994–1996)
• Daihatsu Charmant (1981–1984)
• Daihatsu Cuore (1989–1990)
• Daihatsu Delta (1983–1997)
• Daihatsu Mira Gino (1998–2003)
• Daihatsu Mira Gino (1999–2003)
• Daihatsu Move (1997–1999)
• Fiat Sedici (2006–2014)
• Ford Laser (1985–1990)
• Ford Telstar (1986–1987)
• Holden
• Holden Astra (1987–1989)
• Holden Astra (1987–1989)
• Holden Astra (1987–1989)
• Holden Astra (1987–1989)
• Holden Camira (1984–1987)
• Holden Camira (1984–1987)
• Holden Camira (1987–1989)
• Holden Camira (1987–1989)
• Holden Jackaroo (1987–1991)
• Holden Piazza (1985–1987)
• Holden Rodeo (1988–1998)
• Holden Rodeo (1988–1998)
• Holden Rodeo (1988–1998)
• Holden Rodeo (1988–1998)
• Holden Rodeo (1998–2003)

Description

Spark Plug Sorted: A Champion Guide
> Spark plugs, eh? They're the unsung heroes of your petrol engine, sparking that air/fuel tango. But, like a good pair of boots, they wear out over time thanks to heat and carbon crud. This leads to misfires, drinks more gas, and grumpy performance in your daily drive, be it a Honda Accord or a Mazda 323.

Symptoms You've Found Yourself Here
• Engine's misfiring, especially when you put your foot down.
• Idling rough as guts or stalling out.
• Fuel economy's gone down the gurgler.
• Engine's a pain to start.
• That pesky check engine light's glaring at ya.

Will it pass WOF?
Dodgy spark plugs can muck with your emissions, which could mean a WOF fail. Keep 'em sweet to pass the test!

DIY or Workshop?
Difficulty: 4/10
Estimated Time: 30-60 minutes
Tools Required: Spark plug socket, ratchet, extension, torque wrench, spark plug gap tool.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, a few things to keep in mind, eh?
• Safety First, Mates! Engines get hot! Make sure the motor is stone-cold before you get in there. Wear safety glasses to keep the grit out of your peepers. Also, use gloves. Trust me, nitrile gloves will save your hands from getting covered in oily grime.
• Keep it Clean: Before you even think about pulling the old plugs, give the area around them a good brush. Don't want any crud falling into the cylinders. That's a no-no!
• The Right Gap: Double-check the spark plug gap with a gap tool, eh? Your car's manual will tell you exactly what it should be. Getting this wrong can cause all sorts of dramas.
• Anti-Seize is Your Mate: A tiny dab of anti-seize on the new plug threads keeps them from seizing up later. Don't overdo it, just a wee bit.

Expert Recommendation
Swapping out your spark plugs keeps your engine humming sweetly and saves you at the pump whether you're cruising in a Mitsubishi Delica or buzzing around in a Nissan Sunny. Champion spark plugs (RN9YC4) are a ripper choice, but CARFIX stocks a stack of spark plugs from legends. Pop into Bob's Shop, and I'll help you nail the right part for your [Vehicle Type]. Chur!

Fitment Notes
Make sure that spark plug gap is spot-on for your engine. Check your car's service manual for the right numbers. Some rides, especially the Mazda Bongo, might have special spark plug needs. Keep an eye out!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.