CARFIX

Ryco Cartridge Oil Filter

Ryco Filters — Ryco Cartridge Oil Filter — part number R2883P

Ryco Filters · Part number R2883P · NZ$61.00 incl. GST

Keeping your high-performance European beast, like a BMW 550i or X6 M Competition, purring like a kitten means clean oil.

Price

NZ$61.00 including GST. Part number R2883P.

Fits these vehicles

Description

Oil Filter Change: Keep Your Bimmer Sweet as!
> Oil filters are the unsung heroes, catching all the gritty bits in your engine oil. If you drive a gutsy machine like a BMW, regular oil and filter changes are a no-brainer. A blocked filter starves your engine and can cause some serious damage, especially when you're giving it the beans.

Signs Your Filter's Had It
• Engine's lost its mojo
• Sounds rough as guts
• Oil pressure light's on
• Oil's looking like mud
• Engine's running hotter than a cafe lunch left in the sun

WOF Worthy?
Yep, as long as your new filter's not leaking oil all over the show, you'll pass your WOF with flying colours.

DIY or Get a Pro?
Difficulty: 4/10
Time: 30-60 minutes
Gear You'll Need: Oil filter wrench, socket set, drain pan, torque wrench

🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Mates! Never get under a car that's only held up by a jack. Use proper axle stands – your life's worth more than a few bucks. And chuck on some Safety Glasses to keep the grime out of your peepers.
• Cleanliness Counts: Before you even think about cracking open the filter, give the area a good blast with some Brake Cleaner. Gets rid of all the built-up gunk and makes the job a lot less messy. Plus, grab some Nitrile Gloves – nobody likes oily hands!
• Lube It Up: When fitting the new filter, give the rubber seal a smear of fresh engine oil. This helps it seat properly and prevents leaks. A dab of Anti-Seize Grease on the filter threads makes removal easier next time around.
• Don't Forget the Catchment: Place your Oil Drip Tray strategically to avoid spills on your nice clean driveway.

Bob's Two Cents
Keeping on top of your oil and filter changes is the best thing you can do for your BMW. Pop into Bob's Shop at CARFIX and we'll sort you out with exactly what you need!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> HPR05005)](/parts/HPR05005) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.