CARFIX

TRW Brake Pad Set

TRW — TRW Brake Pad Set — part number GDB2020

TRW · Part number GDB2020 · NZ$587.00 incl. GST

Need new brake pads for your BMW M2 or M5? TRW pads offer top-notch stopping power, and we stock 'em here at CARFIX.

Price

NZ$587.00 including GST. Part number GDB2020.

Fits these vehicles

Description

Swapping Out Your BMW Brake Pads — The TRW Way
> Brake pads are primo for stopping your BMW. If you've got an M2 or M5, you need pads that can handle the heat and give you reliable stopping power, especially when you're giving it a good nudge.
Symptoms That Led You Here
• Squealing or grinding when you hit the brakes
• Brakes feeling a bit soft?
• Vibration through the pedal
• Pads looking a bit worse for wear
• That pesky brake pad warning light
Will it pass WOF?
Dodgy brake pads are a quick way to fail a WOF. They need to be above the minimum thickness to keep you safe on the road.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours
Tools Required: Jack, jack stands, wrench set, socket set, brake caliper tool, torque wrench
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking on those brakes, let's make sure you're sorted with the right gear. Safety first, always!
• Safety Glasses: Keep those peepers safe from brake dust and flying debris. No one wants a trip to the eye doctor.
• Nitrile Gloves: Brake dust isn't your skin's best mate. A good set of Nitrile Gloves will keep your hands clean and protected.
• Brake Cleaner: Blast away all that carbon dust and grime. Makes the job cleaner and helps the new pads bed in properly. Grab a can of Brake Cleaner.
• Caliper Grease: A wee dab of anti-seize caliper grease on the right spots will keep things moving smoothly and prevent annoying squeals. Don't go overboard, though!

And a golden rule: Never, ever get under a car that's only supported by a jack. Use proper jack stands – it's a no-brainer for your safety.
Expert Recommendation
Replacing your brake pads is crucial for keeping your BMW safe and performing at its best. Worn pads mean less stopping power and can even damage your rotors. Swing by Bob's Shop, and we'll get you sorted with the perfect pads for your Beemer!
Fitment Notes
Make sure you've got the right brake pad for your specific BMW model and caliper setup. Front and rear axles might need different pads.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> RBR9852)](/parts/RBR9852) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.