NGK Iridium Double Fine Spark Plug

NGK Spark Plugs · Part number DILKAR6A11 · NZ$55.00 incl. GST

Need new spark plugs for your Nissan March, X-Trail, or Renault Koleos? These little blighters deliver the spark that gets your engine firing properly, and keep things running sweet.

Price

NZ$55.00 including GST. Part number DILKAR6A11.

Fits these vehicles

• Isuzu Como (2007–2012)
• Isuzu Elf (2007+)
• Nissan AD (2005+)
• Nissan Atlas (2007–2012)
• Nissan Atlas (2007+)
• Nissan Atlas (2007+)
• Nissan Atlas (2007+)
• Nissan Bluebird Sylphy (2005–2012)
• Nissan Caravan (2001–2012)
• Nissan Caravan (2007–2012)
• Nissan Caravan (2008–2010)
• Nissan Caravan (2010–2012)
• Nissan Caravan (2012+)
• Nissan Caravan (2012+)
• Nissan Caravan (2012+)
• Nissan Caravan (2012+)
• Nissan Dualis (2007–2013)
• Nissan Dualis (2007–2013)
• Nissan Dualis (2007–2013)
• Nissan Dualis (2007–2013)
• Nissan Elgrand (2010+)
• Nissan Lafesta (2004–2012)
• Nissan Lafesta (2005+)
• Nissan Latio (2011+)
• Nissan March (2010–2015)
• Nissan March (2010+)
• Nissan March (2010+)
• Nissan Murano (2008–2014)
• Nissan Note (2012+)
• Nissan Qashqai (2014+)
• Nissan Serena (2005–2010)
• Nissan Serena (2005–2012)
• Nissan Serena (2005–2012)
• Nissan Teana (2008–2013)
• Nissan Teana (2008–2013)
• Nissan Tiida (2004–2011)
• Nissan Tiida (2004–2012)
• Nissan Tiida (2004–2013)
• Nissan X-Trail (2007–2013)
• Nissan X-Trail (2007–2014)

Description

Spark Plug Replacement: Get Your Motor Humming (Thanks, NGK!)
> Spark plugs, eh? They're the unsung heroes in your Nissan March, Renault Koleos, or Nissan X-Trail's engine. They spark the air and fuel mix, making your car go! But over time, they get gunked up with carbon and wear out. That leads to misfires and your gas bill going through the roof. Keep 'em fresh to keep your engine happy, especially if you're doing the daily grind or hauling the family around.
Signs Your Spark Plugs Might Be Toast
• Engine's misfiring, especially when you put your foot down
• Idling like an old tractor
• Fuel economy's gone down the drain
• Hard to get the engine started in the mornings
• That pesky check engine light's on
Will it pass WOF?
She'll be right, as long as the engine's running smoothly and not chucking out too many fumes. Dodgy spark plugs will make your engine run rough and could fail the emissions test, meaning no WOF. Gutted.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Spark plug socket, ratchet, extension, torque wrench, spark plug gap tool (feeler gauge).
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, a few things to keep in mind to keep things safe and tidy. Grab some Brake Cleaner to blast away any carbon buildup around the spark plug holes – keeps things clean as a whistle. A bit of anti-seize grease on the new plug threads will make life easier next time you're doing this job. Safety glasses are a no-brainer, and some Nitrile Gloves will keep your hands clean. Never work under a car supported only by a jack – always use proper stands!
Expert Recommendation
Swapping out your spark plugs is a key bit of maintenance for motors like the Nissan Tiida, Nissan Murano, and Nissan X-Trail. It keeps the engine purring and saves you coin at the gas pump. NGK plugs are a solid bet, but CARFIX has plenty of options to suit your needs and budget. Swing by Bob's Shop for a yarn – he'll sort you out with the right bits for your ride!
Fitment Notes
Make sure you're using the right spark plug type and gap for your engine. Check your vehicle's service manual for the exact specs. Some Nissan models might need special tools or steps to get the plugs out.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.