TRW · Part number DF2609S · NZ$127.00 incl. GST
TRW Brake Rotor 255mm x 18.4 Min by TRW, part number DF2609S.
NZ$127.00 including GST. Part number DF2609S.
Swapping Out Your Disc Brake Rotors — Featuring TRW
> Those disc brake rotors are the metal plates doing the rounds with your wheels. Your brake pads clamp onto them to slow you down. Over time, they wear down from heat and friction. They can get thin, warped, or develop grooves. This seriously impacts your braking, which is the last thing you want, especially when you rely on your Delica or L300 for hauling the family or the tools of your trade.
What Clued You In?
• Feeling a judder through the brake pedal or steering wheel when you brake.
• Hearing squeals, grinding, or scraping when you hit the brakes.
• Taking longer to stop than usual.
• Seeing grooves, scoring, or heat damage on the rotor.
• Having a brake pedal that feels soft or spongy.
WOF Worthy?
Nah, mate. If your brake rotors are buggered, you'll fail your Warrant of Fitness (WOF) faster than you can say 'flat tyre'. They check those rotors for minimum thickness and any damage to make sure you're safe on the road.
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: 1-2 hours per axle
Gear You'll Need: Jack, jack stands (never get under a car supported only by a jack!), wheel nut wrench, brake caliper socket/spanner, C-clamp or brake caliper piston tool, torque wrench, wire brush, brake cleaner, safety glasses, gloves.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, grab these essentials to make the job safer and easier:
• Safety First: Chuck on some safety glasses to keep the brake dust and grime out of your peepers. Those brake parts can be dusty metal tracks!
• Keep it Clean: A can of Brake Cleaner is your best mate for blasting away brake dust and grease from the new rotors and calipers. Makes everything work smoother. No one wants gritty brakes!
• Glove Up: Nitrile gloves will keep your hands clean and protected from the brake dust and chemicals. Trust me, your hands will thank you.
• Grease is Good: A smear of anti-seize caliper grease on the caliper pins will keep everything moving freely and prevent future squeaks. Don't go cheap on the grease, mate.
Bob's Two Cents
I reckon you should always swap out those brake rotors when they're looking tired or when you're doing the brake pads. Keeps everything sweet and safe. The TRW ones are a top choice for your Delica or L300, known for being tough and reliable. Call into Bob's Shop and we can sort you out with the right parts for your Mitsubishi Delica or L300. I'm always here to help, aye.
Fitment Notes
These brake rotors are made to fit various Mitsubishi Delica and L300 models from '79 to '94. Double-check the exact year, model, and engine of your van to make sure you get the right fit. Specs can be a bit different, even within the same model range.
Ready to get started? Swing by Bob's Shop for all your parts and expert advice!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle;Express;L300, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB204) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.