NGK Standard Resistor Spark Plug

NGK Spark Plugs · Part number BPR6ES · NZ$14.00 incl. GST

Needing to sort your spark plugs? Whether it's for a trusty old Mitsubishi Colt, a rugged Isuzu Bighorn, or even a Porsche 944, we've got the NGK plugs you need to keep things firing smoothly.

Price

NZ$14.00 including GST. Part number BPR6ES.

Fits these vehicles

• Alfa Romeo 155 (1992–1997)
• Chevrolet
• Chevrolet Camaro (1967–1969)
• Daewoo
• Daewoo 1.5I (1994–1995)
• Daewoo Cielo (1995–1997)
• Daewoo Cielo (1996–1997)
• Daewoo Espero (1993–1999)
• Daewoo Espero (1995–1997)
• Daewoo Kalos (2002–2004)
• Daewoo Kalos (2002–2004)
• Daewoo Kalos (2002–2004)
• Daewoo Kalos (2002+)
• Daewoo Kalos (2003+)
• Daewoo Lanos (1997+)
• Daewoo Lanos (1997+)
• Daewoo Lanos (1997+)
• Daewoo Nubira (1997–2003)
• Fiat Ritmo (1984–1986)
• Fiat Uno (1989–1992)
• Fiat X 1/9 (1975–1978)
• Ford Econovan (1984–1997)
• Ford Econovan (1985–1993)
• Ford Econovan (1985–1997)
• Ford Econovan (1986–1988)
• Ford Econovan (1997–2000)
• Ford Econovan (1997–2000)
• Ford Econovan (2000–2003)
• Ford Laser (1985–1985)
• Ford Laser (1985–1990)
• Ford Laser (1989–1995)
• Ford Laser (1989–1995)
• Ford Laser (1989–1995)
• Ford Ltd (1979–1982)
• Ford Ltd (1982–1983)
• Ford Ltd (1983–1984)
• Ford Sierra (1983–1986)
• Ford Sierra (1985–1990)
• Ford Telstar (1983–1985)
• Ford Telstar (1983–1985)

Description

Spark Plug Replacement: Get Your Engine Humming with NGK
> Spark plugs are the unsung heroes that kickstart your engine, igniting the fuel-air mix. But like all good things, they wear out over time thanks to heat and carbon build-up. This can lead to misfires, poor fuel economy, and generally grumpy performance, whether you're cruising in your daily driver or tearing it up on the weekend.

Signs Your Spark Plugs Are Toast
• Engine's misfiring, especially when you put your foot down
• Idling like a grumpy old man
• Fuel economy's gone down the gurgler
• Struggling to start the engine in the mornings
• That pesky check engine light's decided to say hello

Will it pass WOF?
Spark plugs themselves aren't directly checked during a WOF. But if they're past it, your car might fail the emissions test, and that's a WOF fail for sure.

DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Spark plug socket, ratchet, extension, torque wrench, spark plug gap tool (feeler gauge), anti-seize compound.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, make sure you've got these bits and bobs handy to keep things safe and tidy:
• Safety First: Grab some safety glasses to protect those peepers from any flying grit.
• Glove Up: A pair of Nitrile Gloves will keep your hands clean and protected from grease.
• Spark Plug Grease: It's a good idea to apply a dab of anti-seize compound to the threads of your new plugs. This prevents them from seizing up in the future, making removal easier next time around. A little goes a long way!

Expert Recommendation
Swapping out your spark plugs is a no-brainer for keeping your engine purring like a kitten, whether it's in your Mitsubishi Magna or your trusty Land Rover Discovery. And remember, Bob @ CARFIX is always ready to lend a hand and make sure you get the right parts. Pop into Bob's Shop for a yarn!

Fitment Notes
Double-check you've got the right spark plug gap for your engine. A smidge of anti-seize on the threads is your friend. And always torque those plugs to the spec in your service manual.

Bob's your uncle!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.