Borg & Beck · Part number BDL7227 · NZ$79.00 incl. GST
Got a wobbly ride in your Alfa Romeo Giulietta or Fiat Punto? Your sway bar links, those humble heroes connecting the sway bar to your suspension, might be buggered.
NZ$79.00 including GST. Part number BDL7227.
Got the Clunkies? Sway Bar Link Replacement Guide — Borg & Beck Edition
> Sway bar links (aka stabilizer bar links) are crucial for keeping your car flat in the corners. They join the sway bar to your wheel hubs, stopping that unnerving body roll. When they wear out, you'll hear clunks and your handling will feel like you're steering a boat, especially noticeable in nippy cars like the Alfa Romeo Giulietta and Fiat Punto.
Symptoms That Led You Here
• Clunking or rattling from the suspension, especially over bumps? Sounds like a loose toolbox?
• Handling gone to custard? Body roll making you seasick?
• Steering feeling vague and wobbly, like a drunken sheep?
• Links looking bent, busted, or with too much play?
Will it pass WOF?
Dodgy sway bar links are a WOF fail if they mess with your car's handling. Get them sorted before your next WOF check, or you'll be gutted.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get stuck in, let's make sure you're set. Safety first, as always!
• Safety Glasses: Don't want any rust or crud in your peepers. Safety Glasses
• Nitrile Gloves: Keep your hands clean and protected. No one likes greasy mitts. Nitrile Gloves
• Give 'em a good soak.
• Proper Jack and Stands: Never, ever get under a car supported only by a jack! Use stands, mate. Seriously.
Expert Recommendation
Worn sway bar links are a safety hazard. Replacing them sharpens up your handling and stops further damage. Borg & Beck is a top choice, but CARFIX has a range of options to suit your budget. Bob @ CARFIX is always on hand to help you work out exactly what part you need for your Alfa Romeo Giulietta or Fiat Punto. Make sure you head over to Bob's Shop for a chat!
Fitment Notes
Make sure the new link fits your exact model and year. Some models have different lengths and mounting setups.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this sway bar link, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.