NGK Spark Plugs · Part number XR5IX · NZ$61.00 incl. GST
Need to get that classic Holden firing on all cylinders? Spark plugs are key, especially in old-school rides like the E Series and Monaro.
NZ$61.00 including GST. Part number XR5IX.
Spark Plug Sorted: Your DIY Guide (feat. NGK)
> Right, spark plugs. They're what give your Holden's engine that zap to get the fuel burning. Over time, the spark erodes and gunk builds up, which means misfires and less grunt, especially in those older E Series and Monaros.
Reckon Your Spark Plugs Are Kaput?
• Engine's misfiring, especially when you put your foot down
• Idling rough as guts
• Fuel economy's gone down the drain
• Struggling to get the engine started
• That pesky check engine light's on
WOF Worries?
Dodgy spark plugs can mean more emissions, and that's a WOF fail here in New Zealand. Keep your plugs sweet to pass the test.
DIY or Get a Pro?
Difficulty: 4/10
Time Needed: 1-2 hours
Gear You'll Need: Spark plug socket, ratchet, extension bar, torque wrench, spark plug gap tool
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get your hands dirty, let's make sure you're sorted with the right bits and pieces. This isn't just about swapping out a part; it's about doing the job properly and keeping yourself safe.
• Safety First, Mates! Wear safety glasses. You don't want bits of crud flying into your eyes when you're yanking out those old plugs. And grab some heavy-duty Nitrile Gloves – keeps the hands clean, eh?
• Brake Cleaner is Your Friend: Give those spark plug holes a good blast with Brake Cleaner before you pull the old plugs. Gets rid of any loose carbon or oil that could fall into the cylinder. Nasty stuff.
• Anti-Seize is the Key: A tiny dab of anti-seize on the new spark plug threads will save you a heap of grief next time you need to change them. Trust me on this one.
Bob's Two Cents
Swapping your spark plugs is vital for keeping your classic Holden running sweet and saving you money on fuel. I'm always here at Bob's Shop to help you figure out exactly what you need for your Holden. Give us a yell!
Fitment Lowdown
Make sure that spark plug gap is spot-on for your Holden model. Check your car's manual to get the right numbers.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.