NGK Spark Plugs · Part number UR5IX · NZ$55.00 incl. GST
NGK Iridium Spark Plug by NGK Spark Plugs, part number UR5IX.
NZ$55.00 including GST. Part number UR5IX.
Spark Plug Swap-Out: The NGK Way
> Right, so spark plugs – tiny but mighty! They're the blokes responsible for kick-starting the whole combustion shebang in your engine. Over time, they get a bit sad thanks to heat and carbon build-up, especially in older rigs like Ford Falcons and Chevy Corvettes. That's when the trouble starts.
Uh-Oh, Sounds Like You've Got These Issues:
• Engine's misfiring, especially when you put your foot down
• Idling rough as guts or stalling out
• Fuel economy's gone down the drain
• Engine's a pain to start
• That pesky check engine light's on
Will it pass WOF?
Dodgy spark plugs can cause emissions to go through the roof, which means a big fat fail at WOF time. Keep 'em sweet to pass the test, mate.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Spark plug socket, ratchet, extension, torque wrench, spark plug gap tool.
Expert Recommendation
Swapping out spark plugs is a no-brainer for keeping your engine happy and your fuel bills down, especially in older vehicles. Pop into Bob's Shop to nut out exactly what you need for your [Vehicle Type]!
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First: Engines get HOT! Make sure the engine is cool before you even think about touching those plugs. And yeah, disconnect the battery – just in case.
• Cleanliness Counts: Before you pull anything out, give the area around the spark plugs a good clean with some Brake Cleaner. You don't want any crud falling into the cylinders.
• Glove Up: Keep those mitts clean with a pair of Nitrile Gloves. Trust me, you'll thank me later.
• Spark Plug Grease: A dab of dielectric grease on the spark plug boots helps keep moisture out and makes them easier to remove next time.
Fitment Notes
Make sure you've got the right spark plug type and gap for your engine. Some beasts, like the Ford Falcon V8 351ci, might need specific spark plug designs. Check your vehicle's service manual – it's your bible.
Bob's verdict: Get those plugs sorted, and your ride will thank you for it!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.