Tridon · Part number TT618-195 · NZ$591.00 incl. GST
Right, a Thermostat is a wee but mighty engine part that keeps your coolant flowing just right, making sure your engine runs sweet as a nut without getting too hot under the collar.
NZ$591.00 including GST. Part number TT618-195.
Thermostat Troubles? Let's Get Your Engine Humming Again with TRIDON!
> Your engine's thermostat is the unsung hero, a clever little valve that manages the coolant dance between your engine and the radiator. When it starts playing up, either sticking open or shut, your engine can get a bit temperamental, especially with our changeable Kiwi weather. Time to get it sorted!
Niggles That Signal a Thermostat on the Fritz:
• Engine running hot, or stubbornly cold
• Temperature gauge doing the disco
• Heater blowing chilly air when it should be toasty
• Using more petrol than usual
• That pesky Check Engine Light making an appearance
WOF Worry?
While a dodgy thermostat might not be a direct WOF fail item, it's a slippery slope. Overheating engines or those running too cold can lead to emissions issues or bigger mechanical problems, and *those* will definitely see you fail your WOF. Keeping your engine at its happy temperature range is key for safety and staying compliant.
DIY or Call in the Pros?
Difficulty: 5/10 (A fair challenge, but doable for the keen DIYer!)
Estimated Time: 1-3 hours (Grab a cuppa, take your time!)
Tools Required: Socket set, screwdrivers, pliers, a trusty drain pan, fresh coolant, and maybe a torque wrench if you're feeling fancy.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, let's make sure you've got everything to keep you safe and the job running smoothly:
• Safety First! Always wear some proper Safety Glasses and tough Nitrile Gloves to protect your eyes and hands from hot coolant.
• Cleanliness is Key: Have some Workshop Rags on hand for any spills. Coolant can be messy!
• Catch the Drips: An old drain pan is essential to collect the old coolant. Don't let it run into the garden!
• Fresh Coolant: Make sure you've got the right type and enough fresh coolant to refill your system once the new thermostat is in.
Expert Recommendation from Bob @ CARFIX
Look, if your thermostat's playing up, don't muck around. Get it replaced pronto! You don't want a small issue turning into a big engine headache from overheating. This TRIDON thermostat (MPN: TT200-180) is a top-notch choice, made to the same standards as your original part, so you know it'll do the job. And hey, if TRIDON isn't your jam, we've got a whole range from other trusted names. Pop into Bob's Shop for a yarn – I'll help you pinpoint exactly what your vehicle needs!
Fitment Notes
This TRIDON thermostat is designed for a wide array of vehicles. Just make sure to double-check against your specific vehicle's requirements to ensure it's the perfect match. No one likes a mismatch!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this thermostat, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.