CARFIX

RDA GP Max General Purpose Low Metallic Brake Pad Set RDB430

RDA Brakes — RDA GP Max General Purpose Low Metallic Brake Pad Set — part number RDB430

RDA Brakes · Part number RDB430 · NZ$86.00 incl. GST

Need new brake pads for your classic Honda like the Accord or Prelude i?

Price

NZ$86.00 including GST. Part number RDB430.

Fits these vehicles

Description

Brake Pad Replacement Guide — Sorted with RDA
> Brake pads are what bring your trusty Honda to a halt, clamping down on the rotors. They wear out over time, especially on older models like the Accord and Prelude i that have clocked up a few K's. Letting them go too long is asking for trouble, and can even cause more expensive damage to your rotors.

Spotting the Signs
• Squealing like a pig when you hit the brakes?
• Taking ages to pull up?
• Brake pedal feeling soft as butter?
• Steering wheel juddering when you brake?
• Pads looking thinner than a cafe lunch slice (less than 3mm)?

WOF Woes?
Worn brake pads? Gutted, mate, that's a guaranteed WOF failure. No ifs, buts, or maybes. You need decent pads to pass the test and keep you safe on the road.

DIY or Get a Pro?
Difficulty: 6/10 (Tricky)
Estimated Time: 1-2 hours per axle
Tools Required: Jack and jack stands, lug wrench, C-clamp or brake caliper piston tool, socket set, torque wrench, brake cleaner, and potentially a wire brush.

Expert's Two Cents
Here at CARFIX, we know how crucial good brakes are, especially on older Hondas. Leaving worn pads too long can be a costly mistake. We reckon you should swap them out as soon as you see signs of wear. These RDA RDB430 pads are a solid choice for your Accord or Prelude i.

🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Mates! Never, ever get under a car supported only by a jack. Use proper Jack Stands. Safety glasses are a no-brainer to keep the brake dust out of your peepers.
• Keep it Clean: Brake dust is nasty stuff. Give everything a good blast with Brake Cleaner before you start pulling things apart. This'll help you see what you're doing and stop the dust from getting everywhere.
• Protect Your Hands: Heavy-duty Nitrile Gloves will keep your hands clean and free from brake fluid. Trust me, you don't want that stuff on your skin.
• Lube it Up: A smear of anti-seize Caliper Grease on the caliper pins will keep everything moving smoothly and prevent squeaks. A little goes a long way.

Fitment Notes
These RDA pads are made for Honda Accord and Vigor EX models from '85 to '89, and the Prelude i from '86 to '87. Double-check your year and model to be sure, as things can vary.

Bob @ CARFIX is always on hand to help you work out exactly what part you need for your Honda. Make sure you head over to Bob's Shop for a chat!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> Check out our compatible disc brake rotors (part DF2657S) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.