RDA GP Max General Purpose Low Metallic Brake Pad Set
RDA Brakes · Part number RDB429 · NZ$87.00 incl. GST
Got an older Honda Accord, Vigor, Prelude, Integra, or even a Rover 416i needing some new brake pads? These RDA ones are just the ticket, giving you reliable stopping power.
Price
NZ$87.00 including GST. Part number RDB429.
Fits these vehicles
- Honda
- Honda
- Honda
- Honda Accord (1985–1989)
- Honda Accord (1986–1989)
- Honda Accord (1987–1989)
- Honda Integra (1986–1989)
- Honda Prelude (1986–1987)
- Rover 416I (1986–1989)
Description
Swapping Out Your Brake Pads — The RDA Way
> Brake pads? They're the unsung heroes that clamp down on your brake rotors, turning your car's forward motion into the heat that brings you to a stop. Over time, they wear down, especially in older rides like your Honda Accord or Rover 416i that have clocked up the kms. Ignoring this wear can lead to some pretty nasty damage to other braking bits.
Tell-tale Signs You've Found This Page
• Brakes sounding like a flock of seagulls or a coffee grinder
• Brake pedal feeling softer than a cafe lunch
• Steering wheel doing the jitterbug when you brake
• Stopping distances that feel like they've doubled
• Pads looking thinner than a Kiwi saver account after Christmas
WOF Time?
Worn brake pads are a no-go for your WOF, mate. Get them sorted, or you'll be walking. You need decent thickness and good stopping power to pass, no exceptions.
DIY or Get a Pro?
Difficulty: 6/10 (A good weekend project)
Expected Time: An afternoon per axle
Gear You'll Need: Jack, axle stands (never skip these!), lug wrench, G-clamp or caliper tool, spanners, brake cleaner, torque wrench, and maybe a wire brush to get rid of the dusty metal tracks.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get stuck in, a bit of Kiwi common sense. Grab some Brake Cleaner to blast away all that nasty brake dust – you don't want to be breathing that in. A squirt of anti-seize caliper grease on the right spots will keep things smooth. Safety glasses are a must, and a pair of Nitrile Gloves will save your hands from getting covered in brake grime. Safety first, then teamwork!
Expert Recommendation
Bob @ CARFIX reckons you should always jump on those worn brake pads pronto. Don't wait until you're grinding metal on metal! These RDA RDB429 pads are a solid choice for your Honda or Rover. They'll give you reliable stopping power without breaking the bank. If you are unsure, Bob @ CARFIX is always on hand to help you work out exactly what part you need for your Honda Accord or Rover 416i. Make sure you head over to Bob's Shop for a chat!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> DF2657S)](/parts/DF2657S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.