
RDA Brakes · Part number RDB408 · NZ$86.00 incl. GST
Needing new brake pads for your classic 1983-1987 HONDA CIVIC GL or HONDA CIVIC?
NZ$86.00 including GST. Part number RDB408.
Get Your 1980s Honda Civic Stopping Like New with RDA Brake Pads
> Brake pads are the unsung heroes in your classic 1980s Honda Civic's braking system. They take a beating, turning all that forward motion into the friction needed to bring you to a safe stop. Letting them wear down too far is a no-brainer for dodgy stopping and could ruin your weekend cafe lunch plans.
Spotting the Signs of Wear
• Hear a squeal or grind when you hit the anchors?
• Taking longer to pull up at the lights?
• Pedal feeling a bit soft or spongy?
• Seeing less than 3mm of pad left?
WOF Woes?
Worn brake pads are an instant fail for your Warrant of Fitness (WOF). They're pretty strict on brake performance to keep everyone safe on our roads.
DIY or Get a Pro?
Difficulty rating: 5/10
Time needed: An afternoon should do it (1-2 hours per axle)
Gear you'll need: Jack, stands, lug wrench, C-clamp or piston tool, wrench set, torque wrench, and some brake cleaner. A wire brush might come in handy too.
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Mates! Never, ever get under your Civic supported only by a jack. Use proper jack stands – your life's worth it!
• Cleanliness is Key: Brake dust is nasty stuff. Use plenty of Brake Cleaner to blast it away.
• Glove Up: Protect your mitts with some heavy-duty Nitrile Gloves. Keeps the grime off and prevents cuts.
• Grease is Good: A wee dab of anti-seize caliper grease on the right spots will keep things moving smoothly.
Bob's Two Cents
I reckon you should swap out those brake pads the moment you see any wear. These RDA RDB408 pads are spot-on for your HONDA CIVIC GL or HONDA CIVIC (1983-1987), giving you good bang for your buck. Pop into Bob's Shop, and we'll sort you out with the right parts for your Honda Civic.
Important Fitment Info
Double-check that these pads are the right fit for your HONDA CIVIC GL (1983-1987) or HONDA CIVIC (1983-1987). Even within the same model, things can vary, so it's always best to be sure.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> DF2640S)](/parts/DF2640S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.