CARFIX

RDA GP Max General Purpose Low Metallic Brake Pad Set

RDA Brakes — RDA GP Max General Purpose Low Metallic Brake Pad Set — part number RDB1114

RDA Brakes · Part number RDB1114 · NZ$96.00 incl. GST

Need new brake pads for your trusty Mazda Capella, Ford Telstar, or even an old Mazda Cargo van? These RDA brake pads give you dependable stopping power, and we've got 'em here at CARFIX.

Price

NZ$96.00 including GST. Part number RDB1114.

Fits these vehicles

Description

Brake Pad Replacement Guide — With RDA
> Your brake pads are what stops you on the road, turning your car's movement into heat through friction. They wear down over time, so keeping them in good nick is vital, especially if you're cruising around in a Mazda Capella, Ford Telstar, or Mazda Cargo. Let's keep those old sedans safe on our roads!
Spotting the Warning Signs
• Hear squealing, grinding, or chirping when you hit the brakes?
• Taking longer to stop, or the brake pedal feels soft?
• Feeling vibrations in the steering wheel or brake pedal when braking?
• Pads looking thin (less than 3mm of material left)?
• Dashboard warning light on (if your car's got one)?
WOF Woes?
Worn brake pads are a guaranteed fail at your WOF check. You need enough pad material to stop safely (usually over 1.5mm, but we reckon 3mm is the sweet spot for replacement) and no contamination or damage.
DIY or Get a Pro?
Difficulty: 6/10 (A decent challenge)
Time Needed: 1-2 hours per axle
Gear You'll Need: Jack, jack stands, lug wrench, C-clamp or brake caliper piston tool, wrench set, brake cleaner, torque wrench, safety glasses, gloves.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, mate, safety first! Never, ever get under a car supported only by a jack. Always use proper Jack Stands. Grab some Brake Cleaner to blast away all that nasty brake dust – it's not good to breathe in. Speaking of which, Safety Glasses are a no-brainer. And don't forget a pair of Nitrile Gloves to keep your hands clean from brake dust and grease. Lastly, a touch of anti-seize compound on the caliper bolts will make life easier next time you're in there.
Expert Recommendation
Bob here at CARFIX reckons you should swap out your brake pads the moment they show wear to retain peak stopping performance and safety. The RDA RDB1114 pads are a solid choice for a bunch of Mazda and Ford models, offering reliable performance. Keep an eye on those pads and replace them when needed – it's a small price to pay for safety and a longer-lasting braking system. Pop into Bob's Shop; I'll help you find the perfect pads for your Mazda Capella, Ford Telstar, or Mazda Cargo!
Fitment Notes
These pads fit a wide range of Mazda Capella, Mazda 626, Mazda Cargo, and Ford Telstar models from the '80s and '90s. Double-check the year, model, and engine of your car against the product's fitment list to be 100% sure, especially with older vehicles where things can vary. Swing by Bob's Shop for a yarn!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> DF2571S)](/parts/DF2571S) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.