RDA Brakes Standard Disc Brake Rotor Vented 308mm (190mm ID H/B)
RDA Brakes · Part number RDA7966 · NZ$159.00 incl. GST
RDA Brakes Standard Disc Brake Rotor Vented 308mm (190mm ID H/B) by RDA Brakes, part number RDA7966.
Price
NZ$159.00 including GST. Part number RDA7966.
Fits these vehicles
- Infiniti EX (2010+)
- Infiniti FX (2008+)
- Infiniti FX (2008+)
- Infiniti FX (2010+)
- Infiniti G (2010+)
- Infiniti G (2010+)
- Infiniti M (2010+)
- Infiniti M (2010+)
- Infiniti M (2011+)
- Infiniti Q50 (2013+)
- Infiniti Q70 (2013+)
- Infiniti Q70 (2013+)
- Infiniti QX70 (2013+)
- Nissan 350Z (2002–2008)
- Nissan 350Z (2004–2007)
- Nissan 350Z (2005–2008)
- Nissan 350Z (2005–2009)
- Nissan 370Z (2009+)
- Nissan 370Z (2009+)
- Nissan 370Z (2009+)
- Nissan 370Z (2013+)
- Nissan 370Z (2013+)
- Nissan Elgrand (1996–2002)
- Nissan Elgrand (2002–2010)
- Nissan Elgrand (2004–2010)
- Nissan Elgrand (2010+)
- Nissan Elgrand (2010+)
- Nissan Fuga (2004–2007)
- Nissan Fuga (2004–2007)
- Nissan Fuga (2004–2007)
- Nissan Fuga (2005–2009)
- Nissan Fuga (2005–2009)
- Nissan Fuga (2007–2009)
- Nissan Fuga (2007–2009)
- Nissan Fuga (2009+)
- Nissan Fuga (2009+)
- Nissan Fuga (2009+)
- Nissan Fuga (2010+)
- Nissan Murano (2004–2007)
- Nissan Murano (2008–2014)
Description
Swapping Out Your Disc Brake Rotors — RDA Style
> Disc brake rotors are key to your Nissan's brakes. They wear down over time from the pads rubbing on them, especially if you're doing a lot of city driving or pushing it in a 350Z. If they're worn, your braking won't be as good, and that's not safe.
What's Telling You It's Time?
• Brakes are squealing or grinding – sounds like you're trying to stop a train!
• The brake pedal is vibrating or feels like it's pulsing. That's not a good sign.
• It takes longer to stop than it used to. Scary stuff.
• You can see grooves or damage on the rotor itself. Ouch.
• Your brake pads are wearing down unevenly. That's just not right.
WOF Worries?
If your brake rotors are looking sad, it's a no-brainer you might fail your WOF. They need to be a certain thickness and without too much damage to pass the test.
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: An hour or two per rotor
What You'll Need: Jack and stands (never get under a car only supported by a jack!), lug wrench, socket set, torque wrench, and some brake cleaner. A brake caliper tool might come in handy too.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get stuck in, grab these must-haves to make the job safer and easier:
• Safety First: Chuck on some Safety Glasses to keep the brake dust out of your eyes, and a pair of Nitrile Gloves to protect your hands from the grime.
• Brake Dust Be Gone: Give those new rotors (and calipers) a good blast with Brake Cleaner to get rid of any manufacturing oils or dust. Gets them ready for action.
• Stop the Squeal: A wee dab of anti-seize Caliper Grease on the caliper pins will keep things moving smoothly and quietly. Nobody likes squeaky brakes!
Bob's Two Cents
Worn brake rotors mean your Nissan Fuga, Murano, or 350Z isn't stopping as well as it should. Get them replaced to keep your braking top-notch and stop other parts from getting damaged. Pop into Bob's Shop and let's sort you out with the right bits for your Nissan!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB3181DT)](/parts/GDB3181DT) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.