RDA Brakes Standard Disc Brake Rotor Vented 320mm

RDA Brakes · Part number RDA7965 · NZ$128.00 incl. GST

Need new disc brake rotors for your Nissan 350Z or Infiniti Q50? These RDA rotors are just the ticket for reliable stopping power, especially if you're giving it a bit of stick.

Price

NZ$128.00 including GST. Part number RDA7965.

Fits these vehicles

• Infiniti Q50 (2013+)
• Nissan 350Z (2002–2008)
• Nissan 350Z (2004–2007)
• Nissan 350Z (2005–2008)
• Nissan 350Z (2005–2009)
• Nissan Fuga (2004–2007)
• Nissan Fuga (2004–2007)
• Nissan Fuga (2004–2007)
• Nissan Fuga (2005–2009)
• Nissan Fuga (2005–2009)
• Nissan Fuga (2007–2009)
• Nissan Fuga (2007–2009)
• Nissan Fuga (2009+)
• Nissan Fuga (2009+)
• Nissan Fuga (2010+)
• Nissan Murano (2003–2008)
• Nissan Murano (2004–2007)
• Nissan Murano (2007–2014)
• Nissan Murano (2007–2014)
• Nissan Murano (2008–2014)
• Nissan Murano (2008–2014)
• Nissan Murano (2009–2014)
• Nissan Pathfinder (2013+)
• Nissan Pathfinder (2013+)
• Nissan Pathfinder (2013+)
• Nissan Pathfinder (2016+)
• Nissan Pathfinder (2016+)
• Nissan Pathfinder (2016+)
• Nissan Pathfinder (2016+)
• Nissan Skyline (2001–2007)
• Nissan Skyline (2003–2006)
• Nissan Skyline (2006–2011)
• Nissan Skyline (2006–2014)
• Nissan Skyline (2006–2014)
• Nissan Skyline (2007–2015)
• Nissan Skyline (2008–2014)
• Nissan Skyline (2014+)

Description

Disc Brake Rotor Replacement Guide — Featuring RDA
> Your disc brake rotors are what your brake pads clamp onto to bring you to a stop. Over time, they cop a beating from heat and friction and can end up warped, cracked, or too thin. This can make your braking a bit dodgy, especially in heavier motors like Nissans and Infinitis. Let's get them sorted.

Symptoms That Led You Here
• Your brake pedal or steering wheel feels like it's vibrating when you brake.
• You hear squealing, grinding, or scraping when you hit the brakes.
• It takes longer to stop, or your brake pedal feels spongy.
• You can see grooves, cracks, or discolouration on the rotor surface.

Will it pass WOF?
Nah, mate, if your brake rotors are knackered, your car will fail its WOF. Good brakes are a no-brainer for safety.

DIY or Workshop?
Difficulty: 6/10 (Moderate)
Estimated Time: 1-2 hours per axle (if you know your way around a socket set)
Tools Required: Jack and jack stands, lug wrench, brake caliper compression tool, socket set, torque wrench, brake cleaner, wire brush, maybe an impact wrench.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you start wrestling with those rotors, grab these essentials:
• Safety First, Mates! Never get under a car supported only by a jack. Use proper Jack Stands. And chuck on some Safety Glasses – you don't want any brake dust in your eyes!
• Keep it Clean: Brake dust is nasty stuff. Grab a can of Brake Cleaner to blast it away. Makes the job heaps easier and safer.
• Glove Up: Protect your hands with some Nitrile Gloves. Keeps the grime off and makes cleanup a breeze.
• Lube is Your Friend: A bit of Anti-Seize Grease on the caliper bolts will make life easier next time you're in there.

Expert Recommendation
Bob @ CARFIX reckons you should always replace your brake rotors if they're showing wear or damage. Keeps your braking sweet and safe. For vehicles like the Nissan 350Z, Murano, and Infiniti Q50, decent rotors are essential for good stopping. Pop into Bob's Shop, and we'll sort you out with the right part for your Nissan or Infiniti.

Fitment Notes
These rotors fit a bunch of Nissan and Infiniti models, including the 350Z, Fairlady Z, Fuga, Murano, and Skyline 250GT, plus the Infiniti Q50 50 D. Double-check the year, model, and engine size of your car against the fitment list, as brake bits can be different even on the same model.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> GDB1003)](/parts/GDB1003) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.