
Ryco Filters · Part number R2748K · NZ$89.00 incl. GST
Keep your VW Golf GTI or Audi Q5 purring like a kitten by swapping out that old oil filter!
NZ$89.00 including GST. Part number R2748K.
Oil Filter Change-Out: RYCO Edition
> Oil filters are the unsung heroes, keeping your engine oil clean and your high-performance VW Golf GTI or luxury Audi Q5 running sweet as a nut. Over time, they get gunked up, choking the oil flow and putting your engine at risk.
Uh Oh, Sounds Like You've Got These Symptoms?
• Engine's lost its mojo
• Sounds rough as guts
• Oil pressure light's on, mate
• Oil's looking like treacle
• Engine's running hotter than a BBQ on Christmas Day
Will it pass WOF?
Nah mate, a dodgy oil filter won't directly fail a WOF. But if the engine cops damage and starts leaking oil or blowing smoke, then you're in trouble!
DIY or Workshop?
Difficulty: 4/10
Estimated Time: 30-60 minutes
Tools You'll Need: Oil filter wrench, socket set, drain pan, fresh oil, gloves, and safety glasses.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get your hands dirty, let's make sure you're sorted:
• Safety First, Cobber: Wear safety glasses to keep oil splashes out of your peepers, and grab some Nitrile Gloves – nobody likes oily hands!
• Cleanliness is Next to Godliness: Have some rags handy to wipe up any spills. Engine oil can make a real mess if you're not careful, and you don't want it ending up all over your driveway.
• Protection, Mate!: Pop an oil drip tray under the filter to catch the old oil. Trust me, it saves a lot of hassle.
• Lubrication is Key: A little smear of fresh oil on the new filter's rubber seal helps it seat properly and prevents leaks.
Expert Tip from Bob
Keep your Audi or VW's engine happy with regular oil and filter changes. A blocked filter is just asking for trouble down the line. I'm always here to help you find the perfect part for your ride. Swing by Bob's Shop for a yarn!
Fitment Notes
Make sure you're grabbing the right oil filter for your specific Audi or VW model and engine. Always double-check the manufacturer's specs for the correct oil and filter.
Keen to get your hands dirty? Bob's your uncle!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> HPR05005)](/parts/HPR05005) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.