Ryco Oil Filter Cartridge
Ryco Filters · Part number R2592P · NZ$46.00 incl. GST
Keep your BMW humming like a top with regular oil filter changes! This RYCO filter is just the ticket for 325Ci and 530i models, catching all the nasty bits and bobs floating around in your oil. CARFIX has a massive range of oil filters, including RYCO, to suit every Bimmer and budget.
Price
NZ$46.00 including GST. Part number R2592P.
Fits these vehicles
- BMW 3 (1990–1995)
- BMW 3 (1991–1995)
- BMW 3 (1991–1998)
- BMW 3 (1991–1998)
- BMW 3 (1993–1995)
- BMW 3 (1995–1998)
- BMW 3 (1995–1999)
- BMW 3 (1995–1999)
- BMW 3 (1995–1999)
- BMW 3 (1995–1999)
- BMW 3 (1995–1999)
- BMW 3 (1995–1999)
- BMW 3 (1997–2000)
- BMW 3 (1998–2000)
- BMW 3 (1998–2000)
- BMW 3 (1998–2000)
- BMW 3 (1998–2000)
- BMW 3 (1999–2000)
- BMW 3 (1999–2000)
- BMW 3 (2000–2000)
- BMW 3 (2000–2005)
- BMW 3 (2000–2005)
- BMW 3 (2000–2005)
- BMW 3 (2000–2005)
- BMW 3 (2000–2005)
- BMW 3 (2000–2005)
- BMW 3 (2000–2005)
- BMW 3 (2000–2005)
- BMW 3 (2000–2006)
- BMW 3 (2000–2006)
- BMW 3 (2000–2006)
- BMW 3 (2000–2006)
- BMW 3 (2000–2006)
- BMW 3 (2000–2006)
- BMW 3 (2001–2004)
- BMW 3 (2007–2013)
- BMW 5 (1996–2003)
- BMW 5 (1996–2003)
- BMW 5 (1997–2001)
- BMW 5 (1997–2001)
Description
Oil Filter Replacement: Keep Your Bimmer Sweet as with RYCO
> Oil filters are the unsung heroes of your engine, especially in demanding BMWs like the 325Ci and 530i. They keep your oil clean as a whistle, preventing premature wear and tear. Regular changes are a no-brainer for keeping your engine purring like a kitten.
Spotting the Warning Signs
• Engine's lost its mojo?
• Sounds a bit rough around the edges?
• That pesky oil pressure light's decided to make an appearance?
• Oil looks like it's been through the wringer?
• Is your engine running hotter than a cafe lunch?
WOF Woes?
Nope, an oil filter itself won't cause a WOF failure, but any leaks caused by a dodgy filter sure will. Keep it tight, and you'll be sweet as.
DIY or Leave it to the Pros?
Difficulty: A manageable 4/10
Time Needed: Allow 30-60 minutes
Gear You'll Need: A trusty wrench, an oil filter wrench (the right size!), a drain pan (don't spill!), gloves (for clean hands), and fresh oil.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, mate, let's make sure you're sorted.
• Safety First, Eh? Never, ever get under a car supported only by a jack. Use proper jack stands – your life's worth it!
• Cleanliness Counts: Give your engine bay a quick once-over with a rag to avoid any muck getting into your engine. A clean workspace is a happy workspace.
• Protection is Paramount: Wear those nitrile gloves to keep your hands clean and protected from harsh chemicals.
• Lube It Up: A smear of fresh oil on the new filter's rubber gasket ensures a good seal. This step is crucial.
• Engine Flush Additives: Is your engine overdue for an oil change? Consider adding an engine flush additive to your old oil before draining, this will help to remove sludge and deposits.
Expert Advice
Don't skimp on oil and filter changes! It's the best way to keep your BMW running smoothly for years to come. Pop into Bob's Shop, and I'll help you find the perfect fit for your Bimmer.
Fitment Notes
Double-check you've got the right filter for your exact BMW model and engine. Thread size and gasket diameter are key! This one fits a wide range of BMW 3, 5, Z, and X series from 1991-2013.
Bob @ CARFIX is always on hand to help you work out exactly what part you need for your BMW. Make sure you head over to Bob's Shop for a chat!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> HPR05005)](/parts/HPR05005) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.