NGK Platinum Spark Plug

NGK Spark Plugs · Part number PFR5J-11 · NZ$54.00 incl. GST

Need a bit more spark in your Mitsubishi Verada, Montero/Pajero/Shogun, or Diamante? These NGK spark plugs are just the ticket for getting that air/fuel mix firing like it should, keeping your engine sweet as.

Price

NZ$54.00 including GST. Part number PFR5J-11.

Fits these vehicles

• Mitsubishi
• Mitsubishi
• Mitsubishi
• Mitsubishi Diamante (1999–2000)
• Mitsubishi Diamante (1999–2001)
• Mitsubishi Diamante (2000–2003)
• Mitsubishi Diamante (2000–2003)
• Mitsubishi Diamante (2000–2003)
• Mitsubishi Diamante (2000–2003)
• Mitsubishi Diamante (2000–2003)
• Mitsubishi Diamante (2000–2003)
• Mitsubishi Diamante (2000–2003)
• Mitsubishi Diamante (2000–2003)
• Mitsubishi Diamante (2000–2003)
• Mitsubishi Diamante (2002–2003)
• Mitsubishi Diamante (2002–2003)
• Mitsubishi Diamante (2002–2003)
• Mitsubishi Diamante (2003–2004)
• Mitsubishi Diamante (2003–2004)
• Mitsubishi Diamante (2003–2004)
• Mitsubishi Diamante (2003–2005)
• Mitsubishi Diamante (2003–2005)
• Mitsubishi Diamante (2003–2005)
• Mitsubishi Diamante (2004–2005)
• Mitsubishi Diamante (2004–2005)
• Mitsubishi Diamante (2004–2005)
• Mitsubishi Diamante (2004–2005)
• Mitsubishi Diamante (2004–2005)
• Mitsubishi Diamante (2004–2005)
• Mitsubishi Diamante (2004–2005)
• Mitsubishi Diamante (2004–2005)
• Mitsubishi Diamante (2004–2005)
• Mitsubishi Diamante (2004–2005)
• Mitsubishi Magna (2003–2004)
• Mitsubishi Magna (2003–2004)
• Mitsubishi Magna (2003–2004)
• Mitsubishi Magna (2003–2004)
• Mitsubishi Magna (2003–2004)
• Mitsubishi Magna (2003–2004)
• Mitsubishi Magna (2003–2004)

Description

Give Your Mitsubishi Some Sparkle with New Plugs (NGK Featured)
> Spark plugs – they're the unsung heroes tucked away in your Mitsubishi Verada, Montero/Pajero/Shogun, or Diamante's engine, quietly doing the mahi of igniting the fuel. But like anything, they get tired over time, especially battling Auckland's stop-start traffic, leading to misfires and a bit of a rough ride.

Reckon Your Spark Plugs Are Kaput?
• Engine's misfiring – sounds a bit rough and hesitates when you put your foot down.
• Fuel economy's gone down the gurgler.
• Engine's a pain to start, especially on those chilly mornings.
• That pesky check engine light's decided to light up.
• Acceleration's about as exciting as watching paint dry.

WOF Woes?
Dodgy spark plugs can send your emissions through the roof, meaning a quick trip back after your WOF check. No one wants that!

DIY or Hand it to the Pros?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Spark plug socket, ratchet, extension, torque wrench, spark plug gap tool.

Expert's Two Cents
Swapping out your spark plugs is a no-brainer for keeping your Mitsubishi running smoothly and sipping fuel like a champ. Bob @ CARFIX is your man if you're not sure what's what – pop into Bob's Shop for a yarn!

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, grab these must-haves to make the job safer and easier:
• Safety First: Chuck on some Safety Glasses to keep the grit out of your eyes.
• Keep it Clean: A can of Brake Cleaner is perfect for blasting away any built-up carbon deposits around the spark plug area.
• Glove Up: Keep your mitts clean with a set of Nitrile Gloves – no one likes greasy hands.
• Anti-Seize: A dab of anti-seize grease on the new spark plug threads makes future removal a breeze. You'll thank yourself later!

Fitment Notes
Double-check you've got the right spark plug gap for your Mitsubishi. Your service manual will have the gospel on this.

Bob's verdict: Getting those spark plugs sorted is like giving your Mitsubishi a good cup of coffee – wakes it right up! Come have a yarn, and we'll get you sorted.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.