MaxiTrac Shock Absorber/Strut Bush Kit
Maxitrac · Part number MTB3002B · NZ$52.00 incl. GST
If your trusty Ute, like a Toyota Hilux, Nissan Navara, or Mitsubishi Triton, is feeling a bit wobbly or noisy, a fresh Suspension Bush Set is likely what you need to get that steering precision and comfy ride back on track, especially after battling those tough Kiwi roads.
Price
NZ$52.00 including GST. Part number MTB3002B.
Fits these vehicles
- Bedford KB (1972–1988)
- Bedford KB (1972–1988)
- Bedford KB (1972–1988)
- Bedford KB (1983–1988)
- Bedford KB (1985–1988)
- Chevrolet Colorado (2003–2006)
- Chevrolet Colorado (2003–2006)
- Chevrolet Colorado (2006+)
- Chevrolet Colorado (2006+)
- Daihatsu
- Daihatsu
- Daihatsu
- Daihatsu
- Daihatsu
- Daihatsu
- Daihatsu Feroza (1988–1999)
- Daihatsu Feroza (1988–1999)
- Daihatsu Feroza (1988–1999)
- Daihatsu Hijet (1977–1983)
- Daihatsu Hijet (1980–1983)
- Daihatsu Hijet (1980–1983)
- Daihatsu Hijet (1983–1986)
- Daihatsu Hijet (1983–1986)
- Daihatsu Rocky (1985–1987)
- Daihatsu Rocky (1985–1987)
- Daihatsu Rocky (1985–1987)
- Daihatsu Rocky (1985–1987)
- Daihatsu Rocky (1985–1993)
- Daihatsu Rocky (1985–1993)
- Daihatsu Rocky (1985–1998)
- Daihatsu Rocky (1985–1998)
- Daihatsu Rocky (1986–1989)
- Daihatsu Rocky (1987–1993)
- Daihatsu Rocky (1987–1993)
- Daihatsu Rocky (1989–1989)
- Daihatsu Rocky (1990–1997)
- Daihatsu Rocky (1991–1993)
- Daihatsu Rocky (1991–1998)
- Daihatsu Rocky (1991–1998)
- Daihatsu Rocky (1993–1998)
Description
Suspension Bush Set Replacement for Your Ute — Let's Get It Sorted with Maxitrac!
> Alright, let's talk bushes! These little champions are the unsung heroes of your Ute's suspension, acting like tiny shock absorbers for all the joints. They take a real hammering, especially if you're loading up your Toyota Hilux, Nissan Navara, or Mitsubishi Triton, or tackling our gnarly Kiwi tracks. When they start to give up the ghost, your ride quality and handling can go from smooth as a pavlova to rough as guts.
What Your Ute's Telling You
• Hearing clunks or squeaks from underneath, especially when you hit a pothole?
• Does the steering feel a bit vague, like you're guessing where you're going?
• Tyres wearing out unevenly, almost like they're trying to escape?
• Your ride's become a bit of a bone-shaker, and you're feeling every little bump?
• Cornering feels like you're in a boat, with too much sway?
Will it pass WOF?
Flat out, no. Worn or perished suspension bushes are a dead giveaway for a WOF failure here in New Zealand. Those inspectors are sharp-eyed and will spot any excessive play or deterioration, and rightly so — these bits are crucial for keeping your Ute safe and sound on the road.
DIY or Workshop?
Replacing these can be a bit of a mission — we're talking a 6-8 out of 10 on the difficulty scale, depending on where the bush is tucked away. You're looking at 3-6 hours for a full set. Sometimes you'll need special gear like a bush press, not just your standard socket sets, wrenches, and trusty jack stands.
Bob's "No Worries" Wisdom
Bob @ CARFIX will always tell you to get those worn bushes sorted to bring back your Ute's handling, safety, and comfort. The Maxitrac A1245464 Suspension Bush Set is a cracker of a choice, manufactured to OE specifications, built tough for the conditions your Toyota Hilux, Nissan Navara, or Mitsubishi Triton faces. Pop into Bob's Shop for a yarn, and he'll help you pinpoint exactly what your Ute needs!
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive under the Ute, let's make sure you've got everything you need for a smooth and safe job, just like Bob would insist:
• Safety First! Grab some sturdy Safety Glasses — you don't want any surprises from rust or grime. And a good pair of Nitrile Gloves will keep your hands clean and protected.
• Free Up Those Bolts: Those old suspension bolts can be a real pain. A good squirt of Rust Penetrant will be your best mate here, helping to loosen things up before you even get your wrench on them.
• Clean Up Crew: Keep some decent Workshop Rags handy for wiping away grime, grease, and anything else that might come loose.
• Support Your Ride: Remember, never, ever get under a car supported only by a jack! Make sure you've got proper jack stands securely in place.
Fitment Notes
This Maxitrac Suspension Bush Set is specifically designed for Toyota Hilux models from 1997-2005, Nissan Navara models from 1997-2002, and Mitsubishi Triton models from 1992-1996. Always double-check this against your specific vehicle's year and model — you wouldn't want to get the wrong bits!
Got questions or need a hand? Don't be shy, pop into Bob's Shop at CARFIX, and let's get you sorted!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this suspension bush set, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.