NGK Iridium Spark Plug

NGK Spark Plugs · Part number LTR5BI-13 · NZ$68.00 incl. GST

Want to keep your Mazda 6 or Mazda 3 purring like a kitten? Spark plugs are the unsung heroes, igniting the fuel-air mix for a smooth ride and decent gas mileage.

Price

NZ$68.00 including GST. Part number LTR5BI-13.

Fits these vehicles

• Mazda 3 (2003–2009)
• Mazda 3 (2003–2009)
• Mazda 3 (2003–2009)
• Mazda 3 (2003–2009)
• Mazda 3 (2003–2009)
• Mazda 3 (2004–2014)
• Mazda 3 (2006–2009)
• Mazda 3 (2009–2012)
• Mazda 3 (2012–2013)
• Mazda 5 (2005–2008)
• Mazda 5 (2014+)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2008)
• Mazda 6 (2005–2007)
• Mazda 6 (2005–2007)
• Mazda 6 (2005–2007)
• Mazda 6 (2005–2007)
• Mazda 6 (2007–2012)
• Mazda 6 (2007–2013)
• Mazda 6 (2007–2013)
• Mazda 6 (2007–2013)
• Mazda 6 (2007–2013)
• Mazda 6 (2008–2012)
• Mazda 6 (2008–2012)
• Mazda 6 (2008–2012)
• Mazda 6 (2008–2013)
• Mazda Axela (2006–2009)
• Mazda Biante (2008+)
• Mazda Mpv (2006+)

Description

Spark Plug Swap-Out: Get Your Mazda Humming Again
> Spark plugs – those little blighters that give your Mazda its get-up-and-go. Over time, the heat and sparky action in your engine wears them down, especially in models like the Mazda 6 and Mazda 3. This leads to a rough ride, guzzling more gas, and general bad times.

Spotting the Warning Signs
• Engine's misfiring, making idling rough and acceleration hesitant.
• Fuel economy's gone down the drain, meaning more frequent trips to the pump.
• Engine struggles to start, particularly on those frosty mornings.
• The dreaded check engine light is glaring at you.
• The spark plugs themselves look worse for wear.

Will it pass WOF?
Worn spark plugs? Misfires? Increased emissions? Mate, that's a recipe for a WOF failure. Get them sorted!

DIY or Call in the Pros?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Spark plug socket, ratchet, extension, torque wrench, spark plug gap tool.

🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Mates! Engines get HOT! Make sure the car is cool before you start tinkering.
• Glove Up: Keep those mitts clean with a pair of Nitrile Gloves. No one likes greasy fingerprints.
• Spark Plug Socket TLC: Give the area around the spark plugs a good blast with Brake Cleaner before you pull them out. Keeps the grit out of your engine.

Expert Recommendation
Swapping out your spark plugs is a no-brainer for keeping your Mazda running sweet and saving you money at the pump. Pop into Bob's Shop - I'm always here to help you find the right part for your Mazda.

Fitment Notes
Make sure you're using the right spark plug type and gap for your Mazda. Check your owner's manual or ask a mechanic. And be extra careful with those Mazda MPS Turbo models!

Swing by Bob's Shop for a yarn!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.