CARFIX

Mazda 6 MZR (2007–2013)

Introducing the Mazda 6/Atenza with the MZR engine—your dependable companion that blends practicality with an exhilarating driving experience. Perfect for families and professionals in New Zealand, this vehicle stands as a testament to Mazda’s commitment to quality. In this guide, we’ll delve into essential maintenance tips, potential issues, and effective preventative measures to ensure your Mazda remains in optimal condition for years to come.

Parts for the Mazda 6 MZR

Known issues

Owners of Mazda 6/Atenzas with MZR engines should be aware of a few common issues that may arise, especially around the 120,000-180,000 km mark:
• Oil Consumption: Some MZR engines are known to develop oil consumption issues as they age. Regularly check your oil level and top up as needed. Consider using a higher viscosity oil if the consumption becomes excessive.
• Rust: Keep an eye out for rust, particularly around the rear wheel arches. Early intervention can help prevent more extensive damage.

WOF tips

When taking your Mazda 6/Atenza for a Warrant of Fitness (WOF) check in New Zealand, be particularly mindful of these common points of failure:
• Front Lower Control Arm Bushes: These bushes can wear out, leading to excessive play and potential WOF failure.
• Rear Trailing Arm Bushes: Similar to the front control arms, worn rear trailing arm bushes can result in play and WOF failure.

About the Mazda 6 MZR

Under the Hood of Your Mazda 6/Atenza (MZR)

To keep your Mazda 6/Atenza performing its best, routine maintenance is paramount. As your vehicle accumulates mileage, attention to key components can prolong its life significantly. Here’s what to watch for:
• Cooling System: Be proactive around 150,000 km—inspect crucial parts like the water pump, thermostat, and radiator hoses. Replacing worn components can prevent overheating and costly repairs. Explore our cooling products here.
• Engine Components: Regularly check the crank angle sensor and knock sensor for proper function. Don't forget those vital timing kit replacements at recommended intervals to keep your engine running smoothly.
• Braking System: Safety first! Insist on regular inspections of your front and rear brake systems, particularly the brake hoses, especially the rear ones that face wear over time. Check out our braking solutions.
• Suspension & Drivetrain: Keep an eye on suspension components like rear control arm bushes and front drive shafts. Worn parts can compromise handling and safety, so ensure prompt replacements as needed.
• Filtration: Clean air leads to a healthy engine and cabin. Stay on top of your engine and cabin air filter replacements to enhance performance and comfort. See our filtration options.

By adhering to these suggestions coupled with manufacturer service intervals, you’ll not only enhance your driving experience but also protect your investment.

Questions owners ask

What are some common problems I might encounter with my Mazda 6/Atenza (2007-2013) as it gets older?
Around the 120,000-180,000 km mark, some Mazda 6/Atenza models with MZR engines can develop oil consumption issues. Regularly check your oil level and consider using a higher viscosity oil if needed. Also, keep an eye out for rust, especially around the rear wheel arches.
What should I pay special attention to when my Mazda 6/Atenza goes in for a WOF in New Zealand?
During a WOF check, pay close attention to the front lower control arm bushes and rear trailing arm bushes. These are common points of failure and can lead to excessive play, causing your vehicle to fail the WOF.
Where can I get brake pads and other braking components for my 2007-2013 Mazda 6/Atenza in New Zealand?
CARFIX stocks 447 SKUs for the Mazda 6/Atenza (2007-2013). You can find a wide range of braking solutions, including brake pads, brake hoses, and more, on our website. Regular inspection of your front and rear brake systems is crucial for safety.
How often should I replace the timing kit on my Mazda 6/Atenza to keep the MZR engine running smoothly?
Replacing the timing kit at the recommended service intervals is essential for maintaining the smooth operation of your Mazda 6/Atenza's MZR engine. Consult your vehicle's service manual for the specific interval, as it can vary.
What are the key cooling system components I should inspect on my Mazda 6/Atenza around 150,000 km?
Around 150,000 km, it's a good idea to inspect the water pump, thermostat, and radiator hoses on your Mazda 6/Atenza's cooling system. Replacing worn components can prevent overheating and costly repairs. CARFIX stocks water pumps and thermostats for this model.
How often should I replace the air filters in my Mazda 6/Atenza?
Regularly replacing both the engine air filter and cabin air filter in your Mazda 6/Atenza is important for engine performance and passenger comfort. Refer to your service manual for the recommended replacement intervals, typically around the 10,000km service interval.
Are there any suspension components on the Mazda 6/Atenza that I should pay particular attention to?
Yes, keep an eye on suspension components like the rear control arm bushes and front drive shafts. Worn parts can compromise handling and safety, so ensure prompt replacements as needed. CARFIX may stock these parts.