TRW · Part number GDB7559 · NZ$171.00 incl. GST
TRW Brake Pad Set (DB386) by TRW, part number GDB7559.
NZ$171.00 including GST. Part number GDB7559.
Honda Civic Brake Pad Replacement Guide — With TRW
> Your Honda Civic (1983-1987) relies on its brake pads to pull you up safely. Over time, these pads wear down, especially on older vehicles. Swapping them out regularly keeps your braking sharp and stops those rotors from getting damaged. This is especially important given the tough conditions our cars often face around the country.
Spotting the Warning Signs
• Squealing like a gutted pig when you brake?
• Brakes feeling a bit soft?
• Taking longer to pull up than you'd like?
• Steering wheel giving you the jitters when you hit the brakes?
• That pesky brake pad warning light glaring at you?
WOF Woes?
Dodgy brake pads are a surefire way to fail your WOF here in NZ. Your pads need enough meat on them to guarantee safe braking. Give them a regular once-over to make sure you're up to scratch.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours
Tools Required: Jack, jack stands, wrench set, socket set, brake cleaner, C-clamp or brake spreader, torque wrench
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those brakes, make sure you've got these bits and pieces on hand to do the job safely and properly. Trust me, a little prep goes a long way!
• Safety First: Grab some Safety Glasses to keep the dust and debris out of your eyes. You only get one set, so look after them!
• Glove Up: A pair of Nitrile Gloves will keep your hands clean and protected from all the brake dust and grime. Brake cleaner can cause the skin to dry out and potentially be absorbed by the skin, so protect your hands!
• Brake Cleaner: Give everything a good blast with Brake Cleaner to get rid of brake dust and gunk. It'll help everything go back together nice and clean.
• Caliper Grease: A little bit of Caliper Grease on the right spots will keep everything moving smoothly and prevent those annoying squeals. Use only a small amount on the correct parts to prevent contamination.
Also, remember, never get under a car that's only supported by a jack! Use jack stands, mate. It's a no-brainer when it comes to safety.
Expert Recommendation
Worn brake pads are a serious safety risk for your Honda Civic (1983-1987). Upgrading to quality pads like these TRW ones will give you peace of mind with reliable stopping power. Bob @ CARFIX is always here to lend a hand and make sure you get the right part for your Honda Civic. Pop into Bob's Shop for a yarn!
Fitment Notes
Double-check that these brake pads are the right fit for your specific Honda Civic model (1983-1987) and brake system. Some models might have different pad shapes or need special hardware.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (Part No. DF2640S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.