
TRW · Part number GDB4127DT · NZ$217.00 incl. GST
Need new brake pads for your Jeep Cherokee or Grand Cherokee? Good on ya for prioritising safety!
NZ$217.00 including GST. Part number GDB4127DT.
Brake Pad Replacement Guide — Featuring TRW
> Your Jeep's brake pads are what stops you, turning all that forward motion into heat by squeezing against the rotors. They wear down over time, especially if you're hitting the trails or towing the boat. Don't get caught out with dodgy brakes!
Symptoms That Led You Here
• Squealing like a pig when you brake?
• Brakes feeling a bit spongy?
• That pesky brake warning light is on?
• Pads look thinner than a cafe lunch slice of bread?
• Pads wearing unevenly?
Will it pass WOF?
Worn brake pads are a surefire way to fail your WOF. They need to be thick enough to actually, you know, stop the car! Keep an eye on them to avoid the dreaded pink sticker.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours
Tools Required: Jack and stands, wrench set, socket set, C-clamp, brake cleaner, torque wrench
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get stuck in, let's make sure you're sorted. Brakes create a lot of nasty dust, so safety first!
• Safety Glasses: Protect your peepers from brake dust and grime. Safety Glasses
• Nitrile Gloves: Keep your hands clean and protected from brake fluid. Nitrile Gloves
• Brake Cleaner: Blast away that brake dust before you start pulling things apart. Makes the job cleaner and safer. Brake Cleaner
• Caliper Grease: A little dab of anti-seize caliper grease can help keep things moving smoothly and prevent squeaks. Grab a small sachet!
Expert Recommendation
Replacing those brake pads is a no-brainer for keeping your Jeep safe and performing its best. Don't risk it with worn pads! Bob @ CARFIX is your man for all things Jeep – pop into Bob's Shop for a yarn and get the right parts.
Fitment Notes
Double-check these pads fit your specific Jeep model and year – especially if it's a Grand Cherokee CRD or V8. Some models have different setups. Always check the manufacturer's specs before you get started.
---
🛠️ Bob's Pro Tip: Do the Job Right!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.