TRW · Part number GDB4019 · NZ$154.00 incl. GST
Brake pads are super important for stopping safely.
NZ$154.00 including GST. Part number GDB4019.
Brake Pad Replacement Guide — Featuring TRW
> Brake pads are what make your car stop! They're the friction material that squeezes against the rotors. Over time, they wear down, especially in cars. This can make your braking not as good and could be dangerous. Time to get those pads looked at, mate.
Symptoms That Led You Here
• Squealing or grinding noises when braking
• Reduced braking responsiveness
• Increased stopping distance
• Vibration in the steering wheel while braking
• Visible wear or damage on the brake pads
Will it pass WOF?
Worn brake pads are a common reason cars fail their WOF here in New Zealand. Your pads need to be thick enough to stop you safely. Check them regularly!
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours
Tools Required: Jack, jack stands, wrench set, socket set, brake cleaner, C-clamp or brake spreader tool
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get stuck in, here's a quick rundown to make sure you're all set:
• Safety First: Brakes are critical! Never, ever get under a car supported only by a jack. Use proper jack stands – your life depends on it.
• Keep it Clean: Brake dust is nasty stuff. Grab a can of Brake Cleaner to blast away the grime. Makes the job heaps easier.
• Hand Protection: Protect your mitts with some heavy-duty Nitrile Gloves. Keeps the grease and gunk off your skin.
• Lube it Up: A little anti-seize caliper grease on the right spots will keep things moving smoothly and prevent future headaches.
Expert Recommendation
Replacing your brake pads keeps you safe on the road. If they wear down too much, you could damage your rotors and not be able to stop properly. Bob @ CARFIX can help you find the perfect pads for your Ford or Lincoln. Pop into Bob's Shop for a yarn!
Fitment Notes
Always replace brake pads in pairs (both sides) so your braking is even.
Bob's tip: Always double-check everything before you put the wheels back on. Better safe than sorry!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these brake pads, don't skimp on proper workshop preparation and safety products. Doing the job right the first time protects your investment, saves massive workshop labor fees, and guarantees a quiet, smooth ride!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.