TRW Electric Blue EV Hybrid Brake Pad Set
TRW · Part number GDB2038BTE · NZ$174.00 incl. GST
Need new brake pads for your BMW 1 Series or i3?
Price
NZ$174.00 including GST. Part number GDB2038BTE.
Fits these vehicles
- BMW 1 (2004–2007)
- BMW 1 (2004–2007)
- BMW 1 (2004–2011)
- BMW 1 (2006–2011)
- BMW 1 (2006–2011)
- BMW 1 (2007–2011)
- BMW 1 (2008–2013)
- BMW 1 (2008–2013)
- BMW 1 (2009–2011)
- BMW 1 (2011–2015)
- BMW I3 (2013+)
- BMW I3 (2013+)
- BMW I3 (2013+)
- BMW I3 (2017+)
- BMW I3 (2017+)
Description
Stop Right There! A Kiwi Guide to Replacing Your Brake Pads (feat. TRW)
> Your BMW's brake pads are what bring you to a safe stop, using friction against the rotors. They wear down over time, especially with all that stop-start driving in the 1 Series and i3. Keep on top of this maintenance and you'll be all good.
Reckon You Need New Pads? Here's What To Listen For:
• Squealing or grinding sounds when you hit the brakes
• Brakes feeling a bit soft or slow
• That pesky brake pad warning light glaring at you
• Pads looking thin or uneven
• Grooved or scored rotors
WOF Woes?
Worn brake pads are a guaranteed way to fail your WOF here in New Zealand. Don't risk it – get them checked and replaced if needed.
DIY or Hand It Over to a Pro?
Difficulty: 6/10
Time Needed: 2-3 hours
Gear You'll Need: Jack, stands, spanners, sockets, brake cleaner, pad spreader, torque wrench
🛠️ Bob's "Get It Done Right" Companion Checklist
Right, before you get stuck in, safety first, eh? Always use axle stands when lifting your car - never trust a jack alone! Give those brake discs a good blast with some Brake Cleaner to get rid of all that nasty brake dust. It's filthy stuff! A bit of Caliper Grease on the caliper pins helps everything move freely. And don't forget your Safety Glasses - you don't want any of that brake dust in your eyes. Finally, grab some Nitrile Gloves to keep your hands clean. Trust me, you'll thank me later!
Bob's Two Cents
Worn brake pads are a no-brainer when it comes to safety. Get them sorted pronto! TRW (GDB2038BTE) pads are a solid choice for your 1 Series or i3. Pop into Bob's Shop for a yarn – I'll help you find the perfect parts for your BMW.
Important Fitment Stuff
Double-check these pads fit your exact BMW 1 Series or i3 – models and years can vary. Make sure they match your brake system and pad shape.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (Part No. DF4447S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.