TRW Brake Rotor 291mm x 9 Min
TRW · Part number DF7160S · NZ$171.00 incl. GST
For your Toyota Chaser, Mark II, or Crown, disc brake rotors are absolutely vital for safe braking. They're the surface your brake pads grip to bring you to a halt.
Price
NZ$171.00 including GST. Part number DF7160S.
Fits these vehicles
- Toyota Chaser (1992–1996)
- Toyota Chaser (1992–1996)
- Toyota Chaser (1992–1996)
- Toyota Chaser (1992–1996)
- Toyota Cressida (1992–1996)
- Toyota Cresta (1992–1996)
- Toyota Cresta (1992–1996)
- Toyota Cresta (1992–1996)
- Toyota Crown (1990–1999)
- Toyota Crown (1991–1995)
- Toyota Crown (1993–1995)
- Toyota Crown (1995–1999)
- Toyota Crown (1995–2001)
- Toyota Crown (1995–2001)
- Toyota Mark II (1992–1996)
- Toyota Mark II (1992–1996)
- Toyota Mark II (1992–1996)
Description
Disc Brake Rotor Replacement Guide — From TRW
> Disc brake rotors are a seriously important bit of kit in your Toyota's braking system. Over time and under tough conditions, they can wear down, warp from heat, or get a build-up of rust – especially on older models like the Chaser, Mark II, and Crown that have seen a few dusty metal tracks.
Spotting the Warning Signs
• Brake pedal feels like it's vibrating or pulsing
• Brakes are making squealing or grinding noises
• Taking longer to stop than usual
• Rotors look scored or rusty
• Brake pads wearing unevenly
WOF Woes?
Worn or damaged disc brake rotors? Yeah, that's a quick way to fail a WOF here in New Zealand. Rotors need to be within the minimum thickness and in good nick to pass the test.
DIY or Get a Pro?
Difficulty: 6/10
Estimated Time: 1.5 - 2 hours per axle
Tools You'll Need: Jack and stands, lug wrench, socket set, torque wrench, brake cleaner, caliper tool (optional)
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking on those brakes, let's make sure you're sorted. This isn't just about swapping parts; it's about doing the job safely and properly, aye?
• Safety First, Mates: Never, ever get under a car supported only by a jack. Use proper axle stands – your life's worth it!
• Keeping it Clean: Brake dust is nasty stuff. Give your rotors a good blast with some Brake Cleaner before you start, and again when you're done. It'll help everything bed in nicely.
• Hands Protected: Grab some heavy-duty Nitrile Gloves to keep your hands clean and protected from brake fluid and grime. No one wants that stuff soaking into their skin.
• Stopping Squeaks: When reassembling, use a dab of anti-seize caliper grease on the brake pad contact points. It'll help prevent annoying squeaks down the road.
Expert Recommendation
Worn rotors mean dodgy braking on your Toyota Chaser, Mark II, or Crown. Get them replaced to keep yourself safe and avoid damaging other brake bits. Bob @ CARFIX is always ready to help you find the right part for your Toyota. Pop into Bob's Shop for a yarn!
Fitment Notes
Double-check that these rotors fit your specific Toyota model and year – some have different sizes. Always swap rotors in pairs to keep your braking balanced.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle Ii, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB7055YO) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.