CARFIX

TRW Disc Brake Rotor 294mm x 24.4 Min

TRW — TRW Disc Brake Rotor 294mm x 24.4 Min — part number DF6206S

TRW · Part number DF6206S · NZ$252.00 incl. GST

Right then, for your trusty Mitsubishi Outlander or Lancer, these TRW disc brake rotors are the business, providing that crucial friction surface for your pads to grab onto, ensuring you pull up safely every time.

Price

NZ$252.00 including GST. Part number DF6206S.

Fits these vehicles

Description

Disc Brake Rotor Replacement Guide — Let's Get Those Rotors Sorted!
> Disc brake rotors are the hard-working metal discs spinning with your wheels, forming the dance floor for your brake pads. Over time, all that heat and pressure from stopping — especially with the stop-and-go hustle common for daily drivers like your Mitsubishi Outlander or Lancer — can leave them thin, warped, or grooved. When that happens, it's time for a change, mate!
What's Your Ride Telling You?
• Feeling a judder or pulse through the brake pedal or steering wheel when you hit the anchors?
• Hearing squeals, grinds, or nasty scrapes when you slow down?
• Taking a bit longer than usual to stop?
• Can you see scoring, grooves, or funny colours on the rotor surface?
• Does your brake pedal feel a bit soft or spongy?
WOF Check?
Nah, mate, not with knackered rotors. Your New Zealand Warrant of Fitness (WOF) demands that your rotors meet minimum thickness specs and are free from nasty scores, cracks, or warps. Safety first, eh?
DIY or Workshop?
Difficulty: 6/10 (A bit of a mission, but totally doable)
Estimated Time: 1-2 hours per axle — perfect for a Saturday morning.
Tools Required: Jack and jack stands (never get under a car supported only by a jack!), wheel nut wrench, brake caliper compression tool, socket set, torque wrench, brake cleaner, wire brush, and maybe an impact wrench if those bolts are stubborn.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive into tackle those rotors, let's make sure you've got the right bits and bobs to make the job safe, clean, and smooth as a baby's bottom:
• Brake Cleaner: Essential for blasting away all that carbon dust and crud for a clean surface.
• Anti-seize caliper grease: A must-have to keep those caliper pins moving freely and prevent seizing.
• Safety Glasses: Protect those peepers from flying debris — seriously, don't skip this one!
• Heavy-duty Nitrile Gloves: Keep your hands clean and protected from grease and grime.
Expert Recommendation
Bob here at CARFIX always reckons you replace brake rotors in pairs (per axle) to keep your braking nice and balanced, preventing any dodgy uneven wear. Keeping your rotors in tip-top shape is absolutely vital for safety, especially when you've got the family on board in your Outlander. Bob's always keen for a yarn to help you figure out exactly what part you need for your Mitsubishi. Pop over to Bob's Shop for a chat, eh!
Fitment Notes
This particular TRW disc brake rotor is spot-on for a bunch of popular Mitsubishi models, including the Outlander (2005-2022), Lancer i (2008-2999), and various ASX/RVR models (2010-2999). Always, always double-check the exact fitment for your specific vehicle's year, model, and engine variant to make sure it's a perfect match — no guesswork here!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (SKU GDB3200) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.