TRW Brake Rotor 308mm x 14 Min (190mm H/B)
TRW · Part number DF4353S · NZ$237.00 incl. GST
Gotta stop those Infinitis and Muranos safely, right? Your disc brake rotors are the key! It's a no-brainer for good braking.
Price
NZ$237.00 including GST. Part number DF4353S.
Fits these vehicles
- Infiniti EX (2010+)
- Infiniti FX (2003–2008)
- Infiniti FX (2003–2008)
- Infiniti FX (2008+)
- Infiniti FX (2008+)
- Infiniti FX (2010+)
- Infiniti M (2010+)
- Infiniti M (2010+)
- Infiniti M (2011+)
- Infiniti Q50 (2013+)
- Infiniti Q50 (2013+)
- Infiniti Q50 (2013+)
- Infiniti Q50 (2014+)
- Infiniti Q60 (2016+)
- Infiniti Q70 (2013+)
- Infiniti Q70 (2013+)
- Nissan 370Z (2009+)
- Nissan Elgrand (1996–2002)
- Nissan Elgrand (2002–2010)
- Nissan Elgrand (2004–2010)
- Nissan Elgrand (2010+)
- Nissan Elgrand (2010+)
- Nissan Fuga (2004–2007)
- Nissan Fuga (2004–2007)
- Nissan Fuga (2004–2007)
- Nissan Fuga (2005–2009)
- Nissan Fuga (2005–2009)
- Nissan Fuga (2007–2009)
- Nissan Fuga (2007–2009)
- Nissan Fuga (2009+)
- Nissan Fuga (2009+)
- Nissan Fuga (2009+)
- Nissan Fuga (2010+)
- Nissan Murano (2003–2008)
- Nissan Murano (2007–2014)
- Nissan Murano (2007–2014)
- Nissan Murano (2008–2014)
- Nissan Murano (2008–2014)
- Nissan Murano (2009–2014)
- Nissan Murano (2010–2014)
Description
Disc Brake Rotor Replacement Guide — TRW Takes the Stage
> Disc brake rotors are where the rubber meets the road... well, where the brake pad meets the metal! They wear down over time, especially on heavier vehicles like your Infiniti FX or Nissan Murano. Ignoring worn rotors? That's a recipe for dodgy braking and potential trouble.
Symptoms That Led You Here
• Squealing like a stuck pig when you brake
• Feeling a wobble or shake in the pedal
• Taking forever to pull up
• Rotors lookin' scored, rusty, or just plain sad
• Brake pads wearing unevenly
Will it pass WOF?
Dodgy rotors are a surefire way to fail your WOF. They've gotta be thick enough and in decent nick to pass the test. No if's, and's, or but's.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours per axle
Tools Required: Jack and stands, lug wrench, socket set, torque wrench, brake cleaner, rotor removal tool (optional)
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, let's get those rotors swapped safely and cleanly, eh? Here's what you'll need:
• Safety First: Never, ever get under a car supported only by a jack! Use proper axle stands. Safety glasses are a must to keep that brake dust out of your peepers.
• Cleanliness is Key: Brake dust is nasty stuff. Grab a can of Brake Cleaner to blast it away. Those dusty metal brake tracks can be hard work!
• Hand Protection: Keep your hands clean and protected with a pair of Nitrile Gloves. Brake cleaner can dry your skin out fast!
• Anti-Seize: A little dab of anti-seize caliper grease on the threads will make the job easier next time.
Expert Recommendation
Worn rotors are a safety risk, plain and simple. Get them sorted to keep your Infiniti or Nissan stopping like it should. Bob @ CARFIX is your man for sussing out the right part. Pop into Bob's Shop for a yarn!
Fitment Notes
Make sure those new rotors are the right match for your vehicle. Some models have different sizes. Always do both sides of the axle at the same time for balanced braking.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB3294DT) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.