CARFIX

TRW Disc Brake Rotor 258mm x 20.4 Min DF1416S

TRW — TRW Disc Brake Rotor 258mm x 20.4 Min — part number DF1416S

TRW · Part number DF1416S · NZ$107.00 incl. GST

When your trusty Mitsubishi L200 Ute needs to pull up sharp, disc brake rotors are the unsung heroes, providing that crucial surface for your brake pads to clamp down on, ensuring you stop reliably, whether you're loaded to the hilt or tackling some gnarly off-road tracks.

Price

NZ$107.00 including GST. Part number DF1416S.

Fits these vehicles

Description

Disc Brake Rotor Replacement — Bob's Straight-Up Guide
> Righto, let's talk rotors. These round metal mates spin right along with your wheels, giving your brake pads something solid to bite into. But after hauling gear, towing the boat, or just clocking up the kilometres in your L200, they cop a beating. Heat, friction, and wear can thin them out, warp 'em, or score 'em deep, turning your braking from 'sweet as' to 'she'll be right... maybe'. And 'maybe' isn't what you want when you're trying to stop a ute!
What's Your L200 Telling You?
• Feeling like your ute needs a bit more road to stop, especially when it's packed?
• Getting a judder or pulse through the brake pedal or steering wheel when you hit the anchors?
• Hearing squeals, grinds, or scrapes that sound like a rusty gate?
• Spotting grooves, score marks, or even blue heat spots on the rotor surface?
• Is your brake pedal feeling a bit spongy, like a half-flat rugby ball?
WOF Check-Up — Will It Pass?
Nah, mate. If your brake rotors are looking worse for wear — warped, thin, or damaged — your L200 will be getting a fail sticker at the WOF. They're a biggie for safe stopping, and the inspectors won't muck around with that.
DIY or Call a Mate?
Difficulty: 6/10 (A bit of a mission, but doable)
Estimated Time: 1-2 hours per axle (if you've done it before)
Tools Required: Jack and sturdy jack stands (never get under a car supported only by a jack!), wheel nut wrench, brake caliper socket/spanner, C-clamp or caliper piston tool, torque wrench, wire brush, brake cleaner, safety glasses, gloves.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive into swapping out those rotors, let's make sure you've got everything you need for a smooth, safe job:
• Keep it clean, mate! Grab some Brake Cleaner to blast away all that carbon dust and crud. It makes a huge difference.
• Grease it up! A little bit of anti-seize caliper grease on the caliper pins goes a long way to prevent future headaches.
• Protect those peepers! Don't skimp on safety — a good pair of Safety Glasses is non-negotiable when you're dealing with brake dust and flying bits.
• Save your hands! Heavy-duty Nitrile Gloves will keep your mitts clean and protected from grime and chemicals.
Bob's Top Tip
Bob here at CARFIX reckons you should always, always replace your brake rotors if they're showing any signs of wear or damage. Especially on a hard-working beast like the Mitsubishi L200 — reliable stopping power isn't just a nice-to-have, it's essential for safety and handling those heavy loads. Don't ever cut corners on your brakes! Pop into Bob's Shop for a yarn, and I'll help you figure out exactly what your L200 needs.
Fitment Notes
This particular TRW disc brake rotor is a perfect match for various Mitsubishi L200 models churned out between '78 and '97. But hold your horses — it's super important to double-check your exact year, sub-model, and any specific brake system quirks your L200 might have. Even within the same generation, there can be little differences, so let's make sure you get the right part first time!

Catch ya down at Bob's Shop!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (SKU GDB729DT) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.