
DBA Brakes · Part number DBA425S · NZ$223.00 incl. GST
Got an older but goldie like a Mitsubishi Magna or Verada? Disc brake rotors are absolutely crucial – they're what your brake pads clamp onto to bring you to a safe stop.
NZ$223.00 including GST. Part number DBA425S.
Swapping Out Your Disc Brake Rotors — DBA Style
> Disc brake rotors are those metal discs doing the hard yards, working with your brake pads to slow you down. Over time, they can wear down, warp, or get scored – especially with the tough conditions our roads throw at daily drivers like the Mitsubishi Magna and Verada. This means less stopping power, which is never a good thing.
What Clued You In?
• Feeling a wobble or thump in the brake pedal or steering wheel when you hit the brakes.
• Hearing squeals, grinds, or scrapes when braking.
• Noticing you're taking longer to stop.
• Seeing grooves, scores, or funny colours on the rotor.
• Having a brake pedal that feels soft or spongy.
WOF Worthy?
Nope, if your brake rotors are buggered, you'll fail a WOF, mate. They need to be thick enough and free from cracks, scores, and warping to keep you safe on the road.
DIY or Get a Pro?
Difficulty: 6/10 (A decent challenge)
Time Needed: 1-2 hours per axle
Gear You'll Need: Jack, jack stands (never skip these!), lug wrench, brake caliper compression tool, socket set, torque wrench, brake cleaner, and maybe a brake caliper hanger.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get stuck in, grab these essentials to make the job safer and easier:
• Safety First: Chuck on some Safety Glasses to keep the crud out of your eyes and some Nitrile Gloves to protect your hands from brake dust and grease. Brake dust isn't something you want to be breathing in, so consider a dust mask too.
• Cleanliness is Key: Give those new rotors a good spray down with Brake Cleaner to get rid of any factory oils or protectants. This helps your new pads bed in properly.
• Stopping the Squeal: When reassembling the brakes, a tiny smear of copper anti-seize grease on the caliper pins and the back of the brake pads (where they contact the caliper) can help prevent annoying brake squeal. Just don't get any on the friction surfaces!
• Let it soak in for a few minutes before you start wrenching.
Expert Recommendation
Bob @ CARFIX reckons you should always swap out those brake rotors if they're showing wear or damage. Keeps your braking top-notch and safe as houses. The DBA DBA425S rotor is a solid choice, known for being a tough cookie, giving you reliable stopping power for your Mitsubishi Magna or Verada. Pop into Bob's Shop for a yarn, and we'll sort you out with the right part for your Mitsi!
Fitment Notes
This DBA rotor fits a bunch of Mitsubishi Magna and Verada models from '91 to '05, including the Mitsubishi Verada i (1991-1994), Mitsubishi Magna i (1994-1996), Mitsubishi Magna i (1999-2000), Mitsubishi Verada i (1997-1999), and heaps more. Always double-check it's the right one for your year and model – no-brainer, really.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB1126DT)](/parts/GDB1126DT) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.