The Wolseley 18/85, produced in 1968, represents a unique chapter in British motoring history. A product of badge engineering within the British Leyland empire, it combined relatively luxurious appointments with a practical drivetrain. For the New Zealand owner, understanding its quirks and needs is key to keeping this classic on the road.
Hydrolastic suspension leaks, rust (especially around sills, wheel arches, and floor), cooling system problems (overheating), worn engine mounts, Lucas electrics gremlins, and general wear and tear due to age.
WOF tips
Check for rust around structural areas, ensure all lights (including side lights and indicators) are functioning correctly. Hydrolastic suspension should be checked for leaks and correct ride height. Brakes, including the handbrake, should be thoroughly inspected since replacement parts can be difficult to source. Steering and suspension components should be free of excessive play.
About the Wolseley 18/85 B Series
The 18/85 was essentially a more upmarket version of the Austin 1800 'Landcrab', offering a more refined interior and distinctive Wolseley styling. These cars are fairly uncommon in New Zealand, making sourcing parts a potential challenge. Its Hydrolastic suspension, while offering a comfortable ride when working, requires careful maintenance. Rust is a major enemy, so vigilant rustproofing and regular checks are a must. The 1.8-litre engine is reasonably robust, but age takes its toll on seals and hoses. Keeping the cooling system in optimal condition is crucial to prevent overheating.
Questions owners ask
What are the common rust areas I need to watch out for on my Wolseley 18/85 in New Zealand?
Given New Zealand's climate, rust is a significant concern for the Wolseley 18/85. Pay close attention to the sills, wheel arches, and floor, as these are particularly prone to corrosion. Regular rustproofing is highly recommended.
My Wolseley 18/85 is overheating. What could be the cause and how can I prevent it?
Overheating is a common issue in older vehicles like the Wolseley 18/85. Potential causes include a faulty thermostat, a blocked radiator, or deteriorated hoses. Ensure your cooling system is regularly serviced and consider replacing the thermostat and hoses every 5000km to maintain optimal condition.
Where can I get a replacement oil filter for my 1968 Wolseley 18/85 in NZ?
CARFIX stocks 6 SKUs for the Wolseley 18/85. Check the CARFIX website or your local store for an OIL FILTER suitable for your vehicle. Due to the age of the vehicle, it's always best to confirm compatibility before purchase.
What should I check on my Wolseley 18/85 to ensure it passes its WOF in New Zealand?
For a WOF, ensure all lights, including side lights and indicators, are functioning correctly. The Hydrolastic suspension should be checked for leaks and correct ride height. Brakes, including the handbrake, should be thoroughly inspected. Also, check for rust around structural areas.
What's involved in maintaining the Hydrolastic suspension on my Wolseley 18/85?
The Hydrolastic suspension on the Wolseley 18/85 requires careful maintenance. Regularly check for leaks at the suspension units and interconnecting pipes. If the ride height is low, the system may need to be re-pressurized. Due to the complexity, it's often best left to a workshop familiar with this type of suspension.
Are parts readily available for the Wolseley 18/85 in New Zealand?
The Wolseley 18/85 is relatively uncommon in New Zealand, so sourcing parts can be a challenge. CARFIX stocks 6 SKUs. Specialist classic car parts suppliers are also a good resource. Be prepared for potential delays and higher costs compared to more common vehicles.
What are some common electrical problems I might encounter with my Wolseley 18/85?
Like many British cars of its era, the Wolseley 18/85 can suffer from electrical issues, often attributed to Lucas electrics. Common problems include faulty wiring, corroded connections, and failing switches. Regularly inspect and clean electrical connections to prevent issues.