The Volvo EX40 is a pure electric compact SUV representing Volvo's first dedicated EV platform. Built on the CMA architecture, it offers two battery sizes: 64kWh and 82kWh, with single or dual motor configurations producing 231-408hp. NZ's charging infrastructure and climate present unique challenges for EV ownership, making correct maintenance critical. CARFIX provides genuine-equivalent parts and diagnostic support for the EX40's complex electrical systems.
Battery cell imbalance after 30,000 km, causing reduced range. Charging port connector corrosion in coastal environments. Thermal management system leaks, particularly around battery coolant lines. Inverter bearing wear on high-mileage dual-motor variants. Software sync issues between battery management and power electronics. Rear motor bearing noise on Performance AWD models. Reduced regenerative braking efficiency in cold NZ winters. Central touchscreen software freezes requiring hard reset.
Check all exterior lights for correct operation. Ensure charging port cover seals correctly. Verify tire pressure sensors function EV weight distribution affects wear. Check suspension components for unusual wear due to higher vehicle mass. Confirm all safety systems like ABS and stability control respond correctly. Validate windscreen wipers and washers operate smoothly.
The Volvo EX40 represents a significant shift in Volvo's electrification strategy, offering a premium electric SUV experience. The base single-motor variant produces 231hp and uses a 64kWh battery, while the dual-motor Performance model delivers 408hp from an 82kWh pack. Range varies between 350-480km depending on configuration and driving conditions.
Battery health: The lithium-ion battery uses NMC (Nickel Manganese Cobalt) chemistry with active thermal management. Battery degradation is predictable: expect 2-3% capacity loss per year. CARFIX recommends annual battery health diagnostics, checking cell balance and thermal system performance. Avoid repeated DC fast charging above 80% and below 20% state of charge to preserve long-term battery integrity.
Charging system: The EX40 supports up to 150kW DC fast charging and 11kW AC three-phase home charging. The onboard charger and charging port electronics are complex water ingress or connector corrosion can cause charging failures. NZ's variable humidity and coastal salt air accelerate connector degradation. Regular electrical contact cleaning and protective treatments are recommended.
Drivetrain considerations: The electric motors use permanent magnet technology with integrated inverters. Coolant system maintenance is critical the motor and battery share a liquid cooling circuit. Use only Volvo-specified coolant and monitor for leaks. The power electronics require specialized diagnostic tools for fault finding generic OBD2 scanners will not provide full system insight.
Software management: Like most modern EVs, the EX40 receives over-the-air (OTA) updates. These can modify battery management, regenerative braking, and power delivery. Always ensure the vehicle is on the latest firmware version. Periodic software resets can resolve minor electronic glitches that don't trigger formal fault codes.