Toyota Mark II 4S-FE (1990–1995)

The Toyota Mark II Base, a popular import in New Zealand, is known for its dependability and comfortable ride. Many owners appreciate its reliability as a family vehicle. This guide provides essential information for Mark II owners to keep their vehicle running smoothly.

Parts for the Toyota Mark II 4S-FE

• Automatic Transmission Filter (11)
• Radiator Cap (8)
• Oil Filter (8)
• Water Pump (7)
• Oil Seal Oil Pump (6)
• Oil Seal Crank Shaft Front / Timing Front (5)
• Oil Seal Crank Shaft Rear / Rear Main Bearing (5)
• Drive Belt Alternator (5)
• Fuel Filter (5)
• Spark Plug (5)
• Steering Rack Boot Kit (4)
• Drive Belt (4)
• Timing Kit (3)
• Engine Oil Pan Gasket (3)
• Timing Tensioner (3)
• Oil Pressure Switch/Sender (3)
• Wheel Nut (3)
• Thermostat (3)
• Brake Pads Front (3)
• Spark Plug Tube Seal (3)
• Wiper Blade Front (3)
• Brake Shoe Rear (3)
• Thermostat Housing Gasket (2)
• Alternator (2)
• Suspension Bush Rear Shock Absorber - Lower (2)
• Seal Ring (2)
• Oil Seal Camshaft (2)
• Air Filter (2)
• Valve Cover Gasket (2)
• Conrod Bearing (2)
• Manifold Gasket Exhaust (2)
• Sump/Drain Plug (2)
• Oil Cap (2)
• Tie Rod End (2)
• Front Wiper Pack (2)
• Wheel Bearing Kit/Hub Rear (2)
• Master Cylinder Kit Clutch (2)
• Clutch Slave Cylinder (2)
• Wiper Blade (2)
• Thermo Fan Switch (2)
• Shocks / Strut Rear (2)
• Wiper Refill Front (1)
• Steering Rack End (1)
• Suspension Bush Front Control Arm - Lower (1)
• Wheel Bearing Kit/Hub Front (1)
• Ball Joint Front (1)
• Wheel Bearing Grease Front (1)
• Sway Bar Coupling Mount (1)
• Suspension Bush Sway Bar Link (1)
• Drive Belt Power Steering (1)
• Shocks / Strut (1)
• Differential Mount Bush Rear (1)
• Suspension Bush Set Front Sway Bar Link (1)
• Disc Brake Rotor Front (1)
• Disc Brake Rotor Rear (1)
• Brake Caliper Kit Front (1)
• Wheel Cylinder Rear (1)
• Timing Belt Camshaft (1)
• Cylinder Head Gasket (1)
• Head Set/Valve Regrind Gasket Set (1)

Known issues

Mark II owners in New Zealand sometimes experience issues with the power steering pump, automatic transmission, and oxygen sensors around the 150,000 - 250,000 km mark. Regular maintenance and timely repairs can help prevent or mitigate these problems.

WOF tips

When taking your TOYOTA MARK II Base for a Warrant of Fitness inspection, potential watch points include rust in the sills and chassis rails, as well as the condition of the brake lines. Addressing any rust or corrosion proactively can help your vehicle pass inspection.

About the Toyota Mark II 4S-FE

Standard Maintenance for Your TOYOTA MARK II Base

Regular maintenance is crucial for extending the life of your Mark II.
• Brakes: Maintaining the braking system is vital for safety. Regularly inspect brake pads, rotors/discs, and brake lines. Address any squealing, grinding, or pulling to one side during braking promptly.
• Filters: Regularly replacing air, oil, and fuel filters ensures optimal engine performance and fuel efficiency. Clogged filters can lead to reduced power and increased fuel consumption.
• Suspension: The suspension system contributes to a comfortable ride and stable handling. Inspect shocks, struts, and suspension components for wear or damage. Symptoms of suspension issues include excessive bouncing, uneven tire wear, and poor handling.

Potential Problems & What to Watch For
• Power Steering Pump Failure: Keep an eye out for whining noises from the power steering pump, especially when turning the steering wheel. Difficulty steering is another indicator.
• Automatic Transmission Slippage: Be alert for delayed gear changes or slipping between gears, especially at higher mileage. Regular transmission fluid changes can help mitigate this risk.
• Oxygen Sensor Failure: A faulty oxygen sensor can lead to poor fuel economy and a check engine light. Consider this issue if your Mark II's fuel economy drops noticeably.

These problems often arise around the 150,000 - 250,000 km mark, so pay particular attention around these milestones.

Questions owners ask

What are the common issues I should look out for with my 1990-1995 Toyota Mark II in New Zealand?

Owners of the Toyota Mark II 1990-1995 in New Zealand often experience issues with the power steering pump, automatic transmission, and oxygen sensors. These problems tend to arise around the 150,000 - 250,000 km mark. Keep an eye out for whining noises from the power steering, delayed gear changes, or a noticeable drop in fuel economy.

What should I be aware of for a WOF inspection on my Toyota Mark II 1990-1995?

For your Toyota Mark II 1990-1995's Warrant of Fitness inspection, pay close attention to potential rust in the sills and chassis rails. The condition of the brake lines is also a common watch point. Addressing any corrosion proactively can help ensure a smooth inspection.

Where can I get replacement brake pads for my 1990-1995 Toyota Mark II in NZ?

CARFIX stocks 178 SKUs for the Toyota Mark II 1990-1995, including essential braking components. You can find replacement brake pads, rotors/discs, and other parts for your vehicle through CARFIX in New Zealand.

How often should I service my Toyota Mark II 1990-1995?

The recommended service interval for your Toyota Mark II 1990-1995 is every 10,000 km. Regular maintenance, including inspecting brakes, and replacing filters, is crucial for its longevity.

What are the signs of a failing power steering pump in my Toyota Mark II?

If your Toyota Mark II's power steering pump is failing, you might hear whining noises, especially when turning the steering wheel. Difficulty steering is another clear indicator of this issue, which commonly appears around the 150,000 - 250,000 km range.

My Toyota Mark II's fuel economy has dropped. What could be the cause?

A noticeable drop in fuel economy in your Toyota Mark II 1990-1995 could be a symptom of a faulty oxygen sensor. This issue, like others, often surfaces around the 150,000 - 250,000 km mark.