Toyota Corona Premio 1NZ-FE Sedan 80kW (2001–2007)

The Toyota Corona Premio, known for its reliability and practicality, is a popular choice among New Zealand drivers. Proper care and timely maintenance are crucial to ensuring your Premio continues to provide dependable service. This guide provides essential information to help you keep your Corona Premio in top condition.

Parts for the Toyota Corona Premio 1NZ-FE Sedan 80kW

• Engine Oil (17)
• Power Steering Fluid (14)
• Brake Pads Front (13)
• Automatic Transmission Fluid (12)
• Radiator Coolant (10)
• Tie Rod End (7)
• Oil Filter (6)
• Water Pump (6)
• Cabin Filter (6)
• Disc Brake Rotor Front (5)
• Wheel Bearing Kit/Hub Rear (4)
• Air Filter (4)
• Wiper Refill (4)
• Starter Motor (3)
• Brake Fluid (3)
• Steering Rack End (3)
• Brake Shoe Rear (3)
• Spark Plug (3)
• Engine Oil Pan Gasket (3)
• Wheel Bearing Kit/Hub Front (3)
• Wheel Nut (3)
• Thermostat (3)
• Steering Rack Boot Kit (3)
• Alternator (3)
• Engine Mount Front (3)
• Oil Seal Crank Shaft Front / Timing Front (3)
• Drive Belt Power Steering (3)
• Sway Bar Link Front (2)
• Wheel Bearing Kit/Hub (2)
• Valve Cover Gasket (2)
• Timing Chain Guide (2)
• Wiper Blade Front (2)
• Wheel Cylinder Rear (2)
• Engine Mount Rubber Buffer (2)
• Shocks / Strut Front (2)
• Head Set/Valve Regrind Gasket Set (2)
• Brake Hose Front (2)
• Cylinder Head Gasket (2)
• Sway Bar Link (2)
• Timing Kit (2)
• Ignition Coil (2)
• Wiper Refill Front (1)
• Shocks / Strut Rear (1)
• Suspension Bush Front Control Arm - Lower (1)
• Ball Joint Front Lower (1)
• Ball Joint Front (1)
• Wheel Bearing Grease Front (1)
• Strut Boot Kit Front (1)
• Brake Caliper Kit Front (1)
• Brake Caliper Piston Front (1)
• Brake Shoe Fitting Kit Rear (1)
• Drive Belt Alternator (1)
• Engine Mount Rear (1)
• Timing Tensioner (1)
• Oxygen Sensor Pre-Catalytic Converter (1)
• Oil Pressure Switch/Sender (1)
• Oil Seal Crank Shaft Rear / Rear Main Bearing (1)
• Thermostat Housing Gasket (1)
• Manifold Gasket Exhaust (1)
• Manifold Gasket Inlet (1)

Known issues

While generally reliable, the Toyota Corona Premio can experience some common issues as it ages. These may include wear and tear on suspension components, leading to reduced ride comfort and handling. Oil leaks from the engine or transmission are also possible, requiring prompt attention to prevent further damage. Keep an eye on the cooling system, as corrosion or leaks can occur over time, potentially leading to overheating. Regular inspections can help identify and address these issues before they become major problems.

WOF tips

When taking your Toyota Corona Premio for a WOF (Warrant of Fitness) inspection, be aware of potential problem areas. Check the condition of the tyres, brakes (including brake hoses and wheel cylinders), and lights to ensure they meet safety standards. Suspension components should also be inspected for wear or damage. Any oil leaks or cooling system issues will likely result in a WOF failure, so address these proactively. Ensuring all safety features are in working order will increase the chances of passing the inspection.

About the Toyota Corona Premio 1NZ-FE Sedan 80kW

Maintaining your Toyota Corona Premio involves several key areas. Regularly check and replace the engine oil and oil filter to ensure optimal engine lubrication and performance. The timing kit, including the timing chain and water pump, is vital for engine timing and cooling; address any issues promptly to prevent costly damage. The thermostat and thermostat housing play a crucial role in regulating engine temperature, while the temperature sensor/sender coolant accurately conveys engine temperature to the ECU, ensure that the operation is proper. Inspect the induction hose for cracks or damage, as it can affect engine performance. Addressing wear on components like CV joints, front brake hoses, and rear wheel cylinders is important for safety and reliability. Be sure to use high-quality wheel nuts to ensure secure wheel fitment. Gasket replacement may also be needed. Routine servicing and the use of quality parts will help extend the life of your Corona Premio.

Questions owners ask

What are the most common issues I should look out for with my 2001-2007 Toyota Corona Premio in New Zealand?

Owners of the 2001-2007 Toyota Corona Premio in NZ commonly report issues with wear and tear on suspension components, which can affect ride comfort. Oil leaks from the engine or transmission are also possible, and the cooling system can develop corrosion or leaks over time, potentially leading to overheating. Regular inspections can help catch these problems early.

What should I check on my Toyota Corona Premio before a WOF inspection in New Zealand?

Before taking your Toyota Corona Premio for a WOF, pay close attention to the condition of your tyres, brakes (including front brake hoses and rear wheel cylinders), and all lights. Suspension components should be thoroughly checked for wear or damage. Any oil leaks or cooling system issues, such as those affecting the thermostat or thermostat housing, will likely result in a WOF failure, so address these proactively.

Where can I get a replacement timing kit for my 2001-2007 Toyota Corona Premio in NZ?

CARFIX stocks 237 SKUs for the 2001-2007 Toyota Corona Premio. You can find a replacement timing kit, which includes the timing chain and water pump, directly from CARFIX to ensure proper engine timing and cooling for your vehicle.

How often should I change the engine oil and oil filter on my Toyota Corona Premio?

For optimal engine lubrication and performance, it's recommended to regularly check and replace the engine oil and oil filter for your Toyota Corona Premio. The service interval for this vehicle is 10,000 km, so plan your oil and filter changes accordingly.

What parts are crucial for maintaining the engine temperature in my Toyota Corona Premio?

The thermostat and thermostat housing are crucial for regulating engine temperature in your Toyota Corona Premio. Additionally, the temperature sensor/sender coolant accurately conveys engine temperature to the ECU, so ensuring its proper operation is vital to prevent overheating.

Are there any specific parts I should inspect for wear and tear on my Toyota Corona Premio to ensure safety?

Yes, for safety and reliability, you should regularly inspect components like CV joints, front brake hoses, and rear wheel cylinders for wear. Also, ensure you are using high-quality wheel nuts for secure wheel fitment on your Toyota Corona Premio.