Toyota Corona 5A-F Sedan 69kW (1987–1992)

The Toyota Corona, a popular family sedan in New Zealand, is well-regarded for its reliability and practicality. Understanding its common issues and maintenance requirements can help you keep your Corona running smoothly for years to come. This guide provides insights into potential problems, WOF (Warrant of Fitness) considerations, and general upkeep advice relevant to New Zealand owners. While CARFIX does not sell parts, this information will help you have an intelligent conversation with your mechanic.

Parts for the Toyota Corona 5A-F Sedan 69kW

• Suspension Bush Rear Sway Bar Mount (5)
• Coil Spring Front Standard Profile (4)
• Cv Joint Boot Kit Front (3)
• Bump Stop Front (3)
• Rear Single Blade (2)
• Sump/Drain Plug (2)
• Rear Wiper Pack (2)
• Wiper Blade Front (2)
• Clutch Slave Cylinder (2)
• Suspension Bush Rear Control Arm - Lower (2)
• Front Wiper Pack (1)
• Driver Side Blade (1)
• Passenger Side Blade (1)
• Wiper Blade Rear (1)
• Wiper Refill (1)
• Wiper Refill Front (1)
• Water Pump (1)
• Ball Joint Front (1)
• Suspension Bush Rear Control Arm (1)
• Manifold Gasket Exhaust (1)
• Master Cylinder Clutch (1)
• Drive Shaft Front (1)
• Clutch Fork (1)
• Shocks / Strut Front (1)
• Starter Motor (1)
• Alternator (1)

Known issues

Common issues to be aware of include automatic transmission slippage, potential power steering pump failures, and oil leaks that can develop from the valve cover gasket on higher mileage vehicles. Engine mounts can also wear, leading to increased vibration. Rear wheel arch rust is common, especially in coastal areas.

WOF tips

During your WOF inspections, pay close attention to the following areas: Rust around the windscreen and rear arches, and excessive play in steering components. Front lower ball joints also require careful inspection. Brake hoses should be checked for leaks or damage. Ensure the switch stop light is functioning correctly. Front lower control arm bushings tend to crack from UV exposure.

About the Toyota Corona 5A-F Sedan 69kW

Owning a Toyota Corona Base in New Zealand

The Toyota Corona established itself as a dependable and widely used vehicle across New Zealand. Its prevalence during its production years cemented its position as a practical choice for families. The Corona is praised for its reliability.

Potential Issues to Watch Out For

Owners should be mindful of potential problems that can surface with age and mileage. Automatic transmission issues, such as slippage, can emerge, often noticeable after significant use. Power steering pumps are another area that may require attention. Oil leaks from the valve cover gasket are also a possibility.

Maintaining Your Corona

Regular servicing is essential to minimize potential problems. Addressing minor issues promptly can prevent them from escalating into more significant and costly repairs. Paying attention to warning signs and adhering to a consistent maintenance schedule will contribute to the longevity and reliability of your Toyota Corona.

Questions owners ask

What are the most common issues I should look out for with a 1987-1992 Toyota Corona in New Zealand?

Owners of the 1987-1992 Toyota Corona should be aware of potential automatic transmission slippage, power steering pump failures, and oil leaks from the valve cover gasket, especially on higher mileage vehicles. Worn engine mounts can also cause increased vibration, and rear wheel arch rust is a common concern, particularly in coastal areas of NZ.

What should I pay close attention to during a WOF inspection for my 1987-1992 Toyota Corona?

For your 1987-1992 Toyota Corona's WOF, inspectors will specifically look for rust around the windscreen and rear arches, excessive play in steering components, and the condition of the front lower ball joints. Brake hoses should be checked for leaks or damage, and the switch stop light must be fully functional. Also, front lower control arm bushings are prone to cracking from UV exposure and should be inspected.

Where can I get replacement parts for my 1987-1992 Toyota Corona in NZ?

CARFIX stocks 32 SKUs specifically for the 1987-1992 Toyota Corona. You can find a range of parts including those for common issues like brake components, filters, and potentially parts related to steering or engine maintenance.

How often should I service my 1987-1992 Toyota Corona?

The recommended service interval for your 1987-1992 Toyota Corona is every 10,000 km. Adhering to this schedule is crucial for preventing minor issues from escalating and ensuring the longevity and reliability of your vehicle.

Are there any DIY guides available for maintaining my 1987-1992 Toyota Corona?

Yes, CARFIX provides 3 DIY video guides that can assist you with common maintenance tasks for your 1987-1992 Toyota Corona, helping you address minor issues promptly.