Toyota Chaser 1G-E (1980-1984) RWD Petrol 2.0L - Variant 1 (1980–1984)

The TOYOTA CHASER is a reliable vehicle known for its practicality. This guide provides owners with valuable information on maintaining their vehicle, understanding potential issues, and ensuring it meets Warrant of Fitness (WOF) standards.

Parts for the Toyota Chaser 1G-E (1980-1984) RWD Petrol 2.0L - Variant 1

• Radiator Cap (9)
• Wiper Blade Front (7)
• Oil Filter (4)
• Wheel Nut (3)
• Steering Rack Boot Kit (3)
• Steering Rack End (3)
• Brake Shoe Rear (3)
• Oil Pressure Switch/Sender (2)
• Steering Idler Arm (2)
• Bearing Clutch Release (2)
• Clutch Slave Cylinder (2)
• Thermostat Housing Gasket (2)
• Oil Seal Oil Pump (2)
• Thermostat (2)
• Air Filter (2)
• Steering Arm (1)
• Brake Pads Front (1)
• Disc Brake Rotor Front (1)
• Wheel Cylinder Rear (1)
• Master Cylinder Brake (1)
• Master Cylinder Kit Clutch (1)
• Engine Oil Pan Gasket (1)
• Timing Belt Camshaft (1)
• Reverse Lamp Switch (1)
• Tie Rod End (1)
• Conversion Gasket Set (1)
• Seal Ring (1)
• Oil Seal Auxillary Shaft (1)
• Bearing Clutch Spigot (1)
• Clutch Slave Cylinder Kit (1)
• Tailshaft Centre Bearing (1)
• Temperature Sensor / Sender Coolant (1)
• Oil Cap (1)
• Exhaust Flange Gasket Pipe (1)
• Shocks / Strut Rear (1)
• Wheel Bearing Kit/Hub Front (1)
• Wheel Bearing Kit/Hub Rear (1)
• Suspension Bush Front Control Arm (1)
• Ball Joint Front (1)
• Wheel Bearing Grease Front (1)
• Sway Bar Coupling Mount (1)
• Suspension Bush Sway Bar Link (1)
• Shocks / Strut (1)
• Suspension Bush Rear Shock Absorber - Lower (1)
• Suspension Bush Rear Shock Absorber - Upper (1)
• Bush (1)
• Suspension Bush Set Front Sway Bar Link (1)
• Suspension Air Bag Kit (1)

Known issues

While the TOYOTA CHASER is known for its reliability, like any vehicle, it can experience certain issues over time. Owners should be vigilant for:
• General wear and tear: Regular inspections can help identify components needing replacement (e.g., hoses, belts).
• Fluid leaks: Check regularly for any signs of oil, coolant, or brake fluid leaks. Investigate and rectify any leaks promptly to prevent further damage.

It is recommended to seek professional diagnosis for any persistent or concerning issues.

WOF tips

During the New Zealand Warrant of Fitness (WOF) inspection, the following aspects of your TOYOTA CHASER will be carefully assessed:
• Brakes: Brake performance, including efficiency and balance, will be thoroughly tested.
• Suspension: The suspension system will be inspected for wear, damage, and proper function.
• Tyres: Tyre condition, tread depth, and pressure are crucial for WOF compliance.
• Lights: Proper functioning of all lights, including headlights, taillights, brake lights, and indicators, is essential.
• General condition: The overall condition of the vehicle, including bodywork and structural integrity, will be assessed.

Addressing any potential issues before your WOF inspection can help ensure a smooth and successful outcome.

About the Toyota Chaser 1G-E (1980-1984) RWD Petrol 2.0L - Variant 1

This guide focuses on providing general advice for TOYOTA CHASER owners in New Zealand regarding standard fitment parts and potential maintenance needs.

Standard Fitment Considerations

When it comes to maintaining your CHASER, understanding the standard fitment components is key. This includes:
• Brakes: Routine brake inspections are crucial for safety. Pay attention to brake pad wear and rotor condition. Signs of wear and tear should prompt investigation by a qualified mechanic.
• Filters: Regular filter replacements are essential for optimal engine performance and longevity. Consider the air filter, oil filter, and fuel filter as part of your regular maintenance schedule.
• Suspension: The suspension system plays a vital role in ride comfort and handling. Regular checks for worn shocks, struts, and bushings are recommended. Listen for any unusual noises, and address any concerns promptly to maintain vehicle stability.

It's always best to consult with a qualified mechanic for specific advice tailored to your vehicle's condition and mileage.

Questions owners ask

What should I check on my 1980-1984 Toyota Chaser before its WOF inspection in New Zealand?

For your Toyota Chaser's WOF, pay close attention to brake performance and balance, the condition and function of the suspension system, tyre tread depth and pressure, and the proper operation of all lights (headlights, taillights, brake lights, indicators). The overall bodywork and structural integrity will also be assessed.

Where can I get brake pads for my 1980-1984 Toyota Chaser in NZ?

CARFIX stocks 59 SKUs for the Toyota Chaser 1980–1984, including brake pads. You can find them on our website or by visiting a CARFIX store.

How often should I replace the filters on my 1980-1984 Toyota Chaser?

Regular filter replacements are crucial for optimal engine performance. As part of your regular maintenance schedule, you should consider replacing the air filter, oil filter, and fuel filter. The recommended service interval for your Toyota Chaser is every 10,000km.

What are common issues to look out for with a 1980-1984 Toyota Chaser?

Owners of the Toyota Chaser 1980–1984 should be vigilant for general wear and tear on components like hoses and belts. It's also important to regularly check for any signs of fluid leaks, such as oil, coolant, or brake fluid, and address them promptly to prevent further damage.

My Toyota Chaser's suspension feels off. What should I be checking?

If your Toyota Chaser's suspension feels off, you should check for worn shocks, struts, and bushings. Listen for any unusual noises. Addressing these concerns promptly will help maintain vehicle stability and ride comfort.

Are there any DIY guides available for maintaining my 1980-1984 Toyota Chaser?

Yes, CARFIX has 5 DIY videos available that can assist you with various maintenance tasks for your Toyota Chaser 1980–1984.