CARFIX

Toyota Century Hybrid (2018–present)

The Toyota Century Hybrid represents Japanese automotive luxury at its most refined. Introduced in 2018, this third-generation model replaced the V12 with a hybrid V8 powertrain. Less than 100 examples exist in New Zealand mostly in government, diplomatic, and executive fleets. CARFIX provides genuine-equivalent parts for this rare machine, understanding that maintenance requires precision.

Parts for the Toyota Century Hybrid

Known issues

Hybrid battery capacity degradation (expect 10-15% reduction by 120,000 km). Electromagnetic suspension component failures, particularly air spring valves and height sensors. Specialized electrical system communication errors between hybrid management and comfort modules. Rare but expensive injector carbon buildup on the V8 component of the hybrid system. Potential coolant system pressure sensor failures unique to this hybrid configuration.

WOF tips

Extremely strict WOF requirements due to vehicle complexity. Suspension height sensors must be precisely calibrated even 5mm deviation can trigger a failure. Hybrid system warning lights are an automatic fail. Tyre wear must be absolutely even across all four corners. Brake rotor runout must be less than 0.02mm. Windscreen must be OEM glass with specific optical clarity ratings.

About the Toyota Century Hybrid

Toyota's Century is not a car it's a rolling statement of Japanese corporate philosophy. Unlike the ostentatious European luxury sedans, the Century speaks through understatement. The 2018+ hybrid model combines a 5.0L V8 with an electric motor, producing 430 total system horsepower while prioritizing smooth, silent operation.

Powertrain Complexity: The hybrid V8 system is not a mass-market Toyota design. It's a bespoke powertrain with extremely tight manufacturing tolerances. Hybrid battery replacement is a dealer-only task expect costs around $25,000$35,000 if out of warranty. The battery uses a unique lithium-ion design, different from Prius or Lexus hybrid systems. Regular diagnostics are critical these batteries degrade differently under executive driving patterns.

Maintenance Philosophy: Century maintenance isn't about parts replacement it's about preservation. Oil changes use specially formulated 0W-20 synthetic with strict particle contamination limits. The transmission fluid is a closed-loop system with integrated cooling. Toyota recommends service every 10,000 km or annually, whichever comes first. Always use a Toyota-certified technician familiar with high-end Japanese executive vehicles.

Electrical Systems: The Century's electrical architecture is complex. Expect multiple CAN bus networks, with the hybrid system, climate control, and executive comfort features running parallel communication protocols. Diagnostic work requires Toyota's proprietary scan tools. Generic OBD2 readers will provide minimal information. Electrical faults can cascade quickly address warning lights immediately.

Chassis and Suspension: The Century uses an adaptive air suspension with electromagnetic damper control. Each corner has individual ride height and damping adjustment. Replacement air springs cost $1,200$1,800 per corner. The rear suspension incorporates additional compliance for executive passenger comfort. Alignment and suspension geometry must be checked using laser-based measurement systems.

Questions owners ask

What are the common issues to look out for with a 2018+ Toyota Century in New Zealand?
Owners of the 2018+ Toyota Century should be aware of potential hybrid battery capacity degradation, which can see a 10-15% reduction by 120,000 km. Other common issues include failures in the electromagnetic suspension components, specifically air spring valves and height sensors, and specialized electrical system communication errors between the hybrid management and comfort modules. There's also a rare but expensive risk of injector carbon buildup on the V8 engine component and potential coolant system pressure sensor failures unique to this hybrid configuration.
How often should I service my 2018+ Toyota Century in NZ?
Toyota recommends servicing your 2018+ Toyota Century every 10,000 km or annually, whichever comes first. Given the bespoke powertrain and complex electrical systems, it's crucial to use a Toyota-certified technician familiar with high-end Japanese executive vehicles for all maintenance.
What are the WOF requirements for a Toyota Century 2018+ in New Zealand?
The Toyota Century 2018+ has extremely strict WOF requirements due to its complexity. Suspension height sensors must be precisely calibrated, as even a 5mm deviation can cause a failure. Any hybrid system warning lights will result in an automatic WOF fail. Tyre wear must be absolutely even across all four corners, and brake rotor runout must be less than 0.02mm. Additionally, the windscreen must be OEM glass with specific optical clarity ratings.
Can I replace the hybrid battery myself on my 2018+ Toyota Century?
No, hybrid battery replacement on the 2018+ Toyota Century is a dealer-only task. The battery uses a unique lithium-ion design, different from other Toyota or Lexus hybrid systems, and the process requires specialized tools and expertise. Expect costs around $25,000-$35,000 if out of warranty.
Where can I get an oil filter for my Toyota Century 2018–2999 in NZ?
CARFIX stocks 13 SKUs for the Toyota Century 2018–2999. While specific parts like the oil filter are available, it's important to note that oil changes for this vehicle require specially formulated 0W-20 synthetic oil with strict particle contamination limits, and should ideally be performed by a Toyota-certified technician.
What kind of suspension does the 2018+ Toyota Century have and what are the replacement costs?
The 2018+ Toyota Century features an adaptive air suspension with electromagnetic damper control, with each corner having individual ride height and damping adjustment. Replacement air springs cost between $1,200-$1,800 per corner. The rear suspension also incorporates additional compliance for executive passenger comfort, and alignment must be checked using laser-based measurement systems.