The Subaru Forester SJ (2012–2018) and SK (2018–2023) generations are among New Zealand's most popular mid-size SUVs, with over 45,000 units registered across both series. Kiwi owners favour the Forester for its standard symmetrical AWD system, generous ground clearance, and proven reliability in rural and alpine conditions. These generations are common sights at WOF stations nationwide, where their boxer engines and CVT transmissions require specific inspection knowledge.
1. FB25 oil consumption (2012–2014 models) — can burn 1L/1,000km, check levels fortnightly. 2. CVT shudder and valve body failure — typically 80,000–120,000km, repair costs $4,500–$7,000 NZD. 3. Rear wheel bearing wear — common from 100,000km, presents as speed-dependent humming, $400–$600 per side.
Inspectors check for CVT fluid leaks at the cooler lines and pan. Exhaust manifold cracks are common on boxer engines—listen for ticking on cold start. Front lower control arm bushings wear and cause vague steering. EyeSight-equipped models require functional cameras for advanced safety systems. Check rear suspension for sagging if used for towing. Windscreen chips in EyeSight camera zone can fail WOF if they obstruct the sensors.
Overview and NZ Market Position
The SJ Forester arrived in 2012 with Subaru's new FB-series boxer engines, replacing the older EJ platform. The SK generation launched in 2018 on the Subaru Global Platform, offering improved rigidity and safety. Both generations are available in 2.0L and 2.5L naturally aspirated variants, with the 2.0L turbo (XT) being less common in NZ. The Lineartronic CVT is standard on most NZ-new vehicles, though JDM imports occasionally feature traditional automatics.
Why Kiwis Choose the Forester
The Forester's 220mm ground clearance and permanent AWD make it genuinely capable on unsealed roads, ski field access routes, and farm tracks. Unlike many competitors with part-time AWD systems, the Forester's symmetrical layout provides consistent traction. Fuel economy sits around 8–9L/100km for the 2.5L, which is reasonable for a vehicle of this capability. Boot space of 505L (SJ) and 520L (SK) suits families and tradies alike.
Common Failure Points in NZ Conditions
The FB25 2.5L engine in early SJ models (2012–2014) suffered from excessive oil consumption, sometimes burning 1L per 1,000km. Subaru extended warranties and revised piston rings, but affected vehicles still circulate. The CVT chain and valve body can develop shudder between 80,000–120,000km, with replacement costs reaching $4,500–$7,000 NZD. Rear wheel bearing failures are common from 100,000km onwards, typically presenting as a humming noise that increases with speed—budget $400–$600 per side for replacement.
Ownership Tips for Kiwi Drivers
Use only Subaru-approved CVT fluid (not generic ATF) and change it every 50,000km despite Subaru's 'lifetime fill' claim—this alone can double CVT lifespan. Check oil level fortnightly on 2012–2014 models. The timing chain (not belt) is generally reliable but tensioner issues can appear after 150,000km. For SK models, the EyeSight camera system requires recalibration after windscreen replacement—budget an extra $300–$400 NZD on top of glass costs.
Running Costs
Annual servicing runs $350–$500 NZD at independent specialists, or $500–$700 at Subaru dealers. Brake pads and rotors (front) cost approximately $450–$650 fitted. The boxer engine layout makes spark plug replacement more labour-intensive than inline engines—expect $250–$350 for a full set. Tyres in the common 225/60R17 size run $180–$250 each for quality brands.