CARFIX

Pontiac Gto 400 (1966–1967)

The Pontiac GTO, launched in the mid-60s, is often credited with igniting the muscle car era. These early GTOs (1966-1967) represent a significant part of automotive history, blending powerful engines with stylish designs. Finding one in New Zealand is a treat, offering a unique driving experience steeped in American heritage.

Known issues

Common issues include rust (especially in the lower body panels, floor pans, and around window seals), worn suspension components, carburetor problems (particularly with the Tri-Power setups), and electrical gremlins due to aging wiring. Oil leaks from the engine and transmission are also typical, requiring regular monitoring.

WOF tips

Key WOF (Warrant of Fitness) watchpoints include rust in structural areas (chassis, floor), brake performance (especially with drum brakes), condition of the steering and suspension components (worn ball joints, tie rod ends, and bushings), headlight alignment, and ensuring all lights are functioning correctly. Modified or non-standard exhaust systems may also fail the WOF if they exceed noise level limits.

About the Pontiac Gto 400

The '66 and '67 GTOs benefited from distinct styling changes, with the stacked headlights and revised grilles being key identifiers. Under the hood, various V8 options were available, offering a wide range of power outputs, from the base 389 to the hotter Tri-Power versions. Suspension was fairly typical for the era, with coil springs up front and leaf springs in the rear. Drum brakes were standard, but front disc brakes were an option. Given their age and original design, these GTOs require careful maintenance and understanding, especially when imported and driven in New Zealand conditions.

Questions owners ask

What are the common rust spots I should check on a 1966-1967 Pontiac GTO in New Zealand?
Given New Zealand's climate, rust is a major concern. Focus on the lower body panels, floor pans, and areas around the window seals. Also, inspect the chassis for any signs of corrosion, as this can affect the car's structural integrity. Early detection is key to preventing costly repairs.
What are the key things a Warrant of Fitness (WOF) inspector will check on my '66 or '67 GTO?
For a 1966-1967 Pontiac GTO, a WOF inspector will pay close attention to rust in structural areas like the chassis and floor. They'll also check the brake performance, especially if you have the standard drum brakes. The condition of steering and suspension components (ball joints, tie rod ends, bushings) and headlight alignment are also crucial. Ensure all lights are functioning correctly, and be aware that modified exhaust systems might fail if they exceed noise limits.
My 1967 GTO with the Tri-Power setup is running rough. What could be the problem?
Rough running in a Tri-Power equipped GTO often points to carburetor issues. These setups can be sensitive and require careful tuning. Vacuum leaks, clogged jets, or misadjusted linkages are common culprits. It's best to have a specialist familiar with classic carburetors diagnose and repair the system.
Where can I get suspension parts for my PONTIAC GTO 1966–1967 in NZ?
While CARFIX doesn't currently stock suspension parts specifically for the 1966-1967 Pontiac GTO, you can source replacement suspension components like coil springs, leaf springs, ball joints, and bushings from specialist classic car parts suppliers in New Zealand. Online retailers specializing in classic Pontiac parts are also a good option.
What kind of maintenance schedule should I follow for my '66 GTO?
Given the age of your 1966 GTO, a more frequent maintenance schedule than modern cars is recommended. Aim for servicing every 5000km. Pay close attention to fluid levels (oil, coolant, brake fluid), inspect the brakes, and check for any signs of leaks. Regular greasing of chassis components is also essential.
What are some common electrical problems to watch out for on a 1966 Pontiac GTO?
Due to the age of the wiring, electrical gremlins are common. Look out for dim headlights, malfunctioning gauges, and intermittent starting problems. Inspect the wiring harness for cracked or frayed wires, and check the condition of the connectors. A thorough cleaning and replacement of corroded terminals can often resolve many issues.
My '67 GTO is leaking oil. Where are the most likely places to check?
Oil leaks are common in older GTOs. Check the valve cover gaskets, oil pan gasket, and front and rear crankshaft seals. Also, inspect the transmission for leaks around the pan gasket and the front and rear seals. Clean the engine thoroughly to help pinpoint the source of the leak.