Mitsubishi V3000 6G72 Sedan (1988-1989) FWD Petrol 3.0L - Variant 4 (1988–1989)

Welcome to your comprehensive resource for the MITSUBISHI V3000 Base. This guide provides valuable information to help you understand and maintain your vehicle, focusing on standard New Zealand fitment components like brakes, filters, and suspension.

Parts for the Mitsubishi V3000 6G72 Sedan (1988-1989) FWD Petrol 3.0L - Variant 4

• Fuel Filter (24)
• Radiator Cap (7)
• Oil Filter (7)
• Wheel Bearing (6)
• Oil Seal Camshaft (5)
• Timing Tensioner (5)
• Spark Plug (4)
• Lash Adjuster (4)
• Temperature Sensor / Sender Coolant (4)
• Coil Spring Front Standard Profile (4)
• Manifold Gasket Inlet (4)
• Disc Brake Rotor Front (4)
• Oil Seal Crank Shaft Rear / Rear Main Bearing (3)
• Steering Rack End (3)
• Wheel Bearing Kit/Hub Front (3)
• Brake Pads Rear (3)
• Valve Cover Gasket (3)
• Oil Seal Crank Shaft Front / Timing Front (3)
• Drive Belt Pulley Idler/Tensioner (3)
• Valve Cover Bolt Seal/Washer (3)
• Welch / Frost Plug (3)
• Wheel Nut (3)
• Water Pump (3)
• Ignition Lead Set (3)
• Oxygen Sensor (3)
• Air Filter (3)
• Oil Cap (3)
• Thermostat (2)
• Conrod Bearing (2)
• Steering Rack Boot Kit (2)
• Radiator (2)
• Oil Pressure Switch/Sender (2)
• Cv Joint Boot Kit Front Left Inner (2)
• Cv Joint Boot Kit Front Right Inner (2)
• Cv Joint Boot Kit Front Left Outer (2)
• Cv Joint Boot Kit Front Right Outer (2)
• Clutch Kit (2)
• Clutch Slave Cylinder (2)
• Oil Seal Camshaft End (2)
• Manifold Gasket Exhaust (2)
• Cylinder Head Gasket (2)
• Timing Belt Idler (2)
• Advanced Clutch System (2)
• Harmonic Balancer (2)
• Conversion Gasket Set (2)
• Alternator (1)
• Ignition Coil (1)
• Engine Oil (1)
• Sensor Crank Angle (1)
• Wiper Blade Rear (1)
• Thermostat Housing Gasket (1)
• Head Set/Valve Regrind Gasket Set (1)
• Shocks / Strut Rear (1)
• Exhaust Flange Gasket Pipe (1)
• Seal Ring (1)
• Cylinder Head (1)
• Main Bearing Crank Shaft (1)
• Oil Seal Kit Timing (1)
• Ignition Module (1)
• Oil Seal Oil Pump (1)

Known issues

While generally reliable, some potential issues to be aware of for the MITSUBISHI V3000 Base include: *Potential for wear in suspension components over time.* *Regular checks for brake wear are recommended.* *Maintaining a schedule for fluid and filter changes is crucial for longevity.*

WOF tips

During a WOF (Warrant of Fitness) inspection, the MITSUBISHI V3000 Base will undergo checks of the following areas: *Braking system functionality and condition.* *Suspension components for wear and damage.* *Tyre condition and tread depth.* *Lighting and visibility.* *Fluid leaks.* Maintaining these areas will increase your chances of passing a WOF inspection.

About the Mitsubishi V3000 6G72 Sedan (1988-1989) FWD Petrol 3.0L - Variant 4

The MITSUBISHI V3000 Base, while not steeped in extensive motorsport history, offers dependable performance and practicality. Keeping your V3000 Base well-maintained is crucial for ensuring its longevity and reliability.

Brakes: Maintaining a healthy braking system is paramount for safety. Regularly inspect brake pads, rotors, and brake lines for wear and tear. Listen for unusual noises like squealing or grinding when braking, which could indicate the need for attention. Consider a brake fluid flush according to the manufacturer's recommendations to ensure optimal braking performance.

Filters: Regular filter changes are essential for engine health. The engine air filter prevents contaminants from entering the engine, contributing to optimal performance and fuel efficiency. The oil filter removes impurities from the engine oil, protecting vital engine components. The cabin air filter ensures clean air circulating within the vehicle's interior, improving air quality for occupants. Following the recommended replacement schedule for these filters will contribute to the overall longevity of your V3000 Base.

Suspension: The suspension system plays a crucial role in ride comfort and handling. Over time, components like shocks, struts, and bushings can wear, potentially impacting ride quality and stability. If you notice excessive bouncing, unusual noises when driving over bumps, or uneven tire wear, it may be time to inspect the suspension system.

Questions owners ask

What are some common issues to watch out for on a MITSUBISHI V3000 1988–1989?

Keep an eye on the suspension components, as wear can occur over time. Regular checks of the braking system are also recommended. Sticking to the 10000km service interval for fluid and filter changes is crucial for the longevity of your V3000.

What's involved in a Warrant of Fitness (WOF) check for my 1988-1989 MITSUBISHI V3000?

During a WOF inspection, your MITSUBISHI V3000 will have its braking system, suspension components, tyre condition, lights, and fluid leaks checked. Make sure these are in good condition to pass the WOF.

How often should I change the oil and filters on my MITSUBISHI V3000 1988–1989?

To keep your V3000 running smoothly, adhere to the 10000km service interval for oil and filter changes. This includes the engine oil filter, air filter, and cabin air filter to ensure optimal engine performance and clean air inside the vehicle.

Where can I get brake pads for my MITSUBISHI V3000 1988–1989 in NZ?

CARFIX stocks 213 SKUs for the MITSUBISHI V3000, including brake pads. Check our website or visit a store to find the correct brake pads for your vehicle.

What are the key things to maintain on my MITSUBISHI V3000 1988–1989 to keep it running well?

Focus on maintaining the braking system, suspension, and regularly changing the engine oil, oil filter, air filter, and cabin filter every 10000km. Addressing these areas will help ensure the reliability and longevity of your V3000.

What are the signs of worn suspension on my MITSUBISHI V3000 1988–1989?

If you notice excessive bouncing, unusual noises when driving over bumps, or uneven tyre wear, it's a good indication that your V3000's suspension components may be worn and require inspection.

What kind of filters does my MITSUBISHI V3000 1988–1989 have, and why are they important?

Your V3000 has an engine air filter, an oil filter, and a cabin air filter. The engine air filter keeps contaminants out of the engine, the oil filter cleans the engine oil, and the cabin air filter ensures clean air inside the car. Replacing these regularly, every 10000km, is important for performance and your health.